China Cantilever rack

Specifications

Cantilever rack has particular advantages for the storage of strip type cargos,such as tubing and wire,etc.
Cantilever racking has particular advantages for the storage of? materials, ring material, sheet, pipe and irregular goods.
It can include single or double cantilever, cantilever rack with structural stability, good load capacity, space utilization higher characteristic.
Its Column used by cold-rolled H section steel or steel, the arm with square tube, cold-rolled steel or H beam, used between the cantilever and the column-type or bolted type connectors, base and column-type bolt connection between the use of the base with cold-rolled steel or H beam,
Cantilever rack structure advantages:
Cantilevered shelves for storing long material, the ring material, sheet, pipe and irregular goods.?Arm can be single or double, cantilevered shelves with a structural stability, good load capacity, space utilization, higher characteristic.Access of goods from the truck, driving, ormanually.
Cantilever Racking height is usually 2.0 meters (such as access to goods from the forklift can be up to 7 meters), the cantilever length of 1.5 meters, each arm load usually 1000KG or less,
Such rackings are used for machinery manufacturing industry and building materials supermarkets and so on. Plus the shelf, especially for small space, high and low revenue, easy management, and wide compared with the ordinary Rack shelf, a higher utilization rate, can be divided according to the bearing capacity of light dutyweight, middle duty weight and heavy duty weight.

So its frames are divided 150,200 and 300 types,
Production process:
The base of cantilever shelf or the exclusive use of h profile steel production. h bearing steel according to the requirements of the appropriate choice of the national standard steel.

Cantilever Racking do use specific sections of the base, the two back to back c steel plates welded together with the connection, the connection plate width is the width of the column;

Two c steel column welded connection after location in the open eye bolts for easy connection with the column. Bottom edge welded connection for easy expansion bolt connected with the ground.
Cantilever Rack column by welding together two pieces of c beam. c steel beam to q235 quality for raw materials, steel rolling mill line after rolling into the c, in the automatic punch out of the cantilever connection control, hole spacing 140mm.

In the column below, such as by way connected with the h beam welding a connecting plate. Connection with specific sections, such as by way of open joints in the bottom column bolt holes,
The cantilever racking has particular advantages for the storage of strip type cargos,such as tubing and wire,etc. According to the loading capacity, it can be divided into three types: light duty,middle duty and heavy duty shelf.

According to the structural form, it can be divided into single-sided and double-sided cantilever rack.