Filling machine

Name

Specification

Model

Automatic filling machine

1500*1200*2000

DxD-500Y-4

CONFIGURATION DETIAL

1.Filling Material -It is suitable for less than 20pa.s material of viscosity and rigidity

2.  Filling range- under to 2000ml (Acceptance custom-made)

3.Filling error-±0.5 1%

4.Quality-Within one year after delivery.  The seller will provide free service against defects from normal use.

5.Material-plastic.

6.  Filling mode-dive to container

7.Operation-PLC control and touch-screen.

8.Filling mouth-anti-drip special filling mouth 12mm.

9. Capacity-500ml  speed-72pcs/min (parameter test is available from below factor: testing medium on 25^.C shampoo, filling speed adjust to maximum, the speed of conveyor belt is 12m/min,working pressure is 6.5kg/cm²),Influence Capacity factor-bottle shape,filling volume,material feature,filling accuracy,variation of temperature .

10. Feature-Photoelectric and high-low level transducer detection material and bottles,no bottle no filling,counting bottle function ,PLC controlling.

11. Control Discharging material-encoder collect data and pass to PLC which is control filling mouth motion.

12. Feed control-feed material unit is control by high-low transducer and feed pump Feed pump provide for oneself(6~8m³/h rotor pump).

13. Control signal output-Feed pump is controled by low voltage differential signaling.

14. power-220V,50HZ,1.50 KW .

15. Air supply-working pressure≥6.5kg/cm²,air consumption≥0.3m³/min.

16. Whole machine weight-around 500kg