good quality eps raw material

Specifications

EPS Sandwich Panel Machine Feature:

Introductionlaminator for corrugated sandwich panel mainly consists of a roll forming machine
and a sandwich panel laminating system. Through this line, corrugated sandwichpanels can be produced directly, without the shortcoming that traditional corrugatedsandwich panels have to be laminated manually after the forming of corrugatedsheet. Moreover, both the roll forming machine and the laminating system canwork independently. The roll forming machine of the line consists of feeding system,roll forming system and cutting system, while the laminating system is madeup of such equipments as uncoiler, feeding, squeezing, gelatinizing, heating, laminating,edge rolling, edge turn-over, groove-making, edge pruning, pneumaticdevice, automatic cutting and PLC. The whole machine possesses advanced workingcrafts, merging mechanical and electrical equipments into an organic whole. Annualproduction of this line (eight ours a day) is about 600,000 square meters.

Features:

1. Beautiful appearance, low noise, high efficiency.

2. Multiple function: In addition to corrugated sandwich panels, this line can be used to produce simple corrugated sheets, and different model sandwich panels.

3. The transmission of the laminating system is achieved by worm and worm gear which make the laminating speed smooth and steady.

4. The line employs advanced PLC and sets the length and cuts the panel automatically.

5. The main body is welded with type "H"section steel as its material. The surface is treated by rotoblast.

6. Rollers of the laminating system are covered with rubber, which is advantageous to the protection of the surface color of galvanized sheets and makes the equipment laminate steadily. 

Technical Parameters

Machine line specification

Work line speed   1000-3000mm/min (frequency speed adjustment).

attention:depend on glue brand, temperature and proficiency of operators.

Machine length                        about 40 m

Working height                        1050 mm(panel output height)

Laminating effective length        7.5 m

Control way                            adopt industrial computer PLC

Total power                            about 40 kw

power                                    380V/3phase/50 Hz

control voltage                        24 V/110 V/220 V

pneumatic                               0.7 Mpa (self prepared by factory)

best working temperature         around 25°C