High Quality Aluminum 1350 Conductor AAC Conductor AAC Rose

Specifications

High Quality Aluminum 1350 Conductor AAC Conductor AAC Rose

Applications of aac conductor

 Stranded 1350 aluminum conductors shown in this section of data are classified, as follows:

Compact strand conductor for use in bare overhead applications or for use with weather-resistant coverings or insulations is also available.

Construction of aac conductor

Standard 6201-T81 high strength aluminum conductors, conforming to ASTM Specification B-399, are concentric-lay- stranded, similar in construction and appearance to 1350 grade aluminum conductors.

Standard 6201 alloy conductors are similar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. They were developed to fill the need for an economical conductor for overhead applications requiring higher strength than that obtainable with 1350 grade aluminum conductors, but without a steel core. The DC resistance at 20°C of the 6201-T81 conductors and of the standard ACSRs of the same diameter are approximately the same. Conductors of the 6201-T81 alloys are harder and, therefore, have a greater resistance to abrasion than conductors of 1350-H19 grade aluminum for aac conducor

Specifications of aac conductor

SURAL AAC bare conductors meet or exceed the following ASTM specifications:for aac conductor

B-230 Aluminum Wire, 1350-H119 for Electrical Purposes  B-231 Aluminum Conductors, Concentric-Lay-Stranded  B-400 Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

Notes of aac conductor

• Resistance is calculated using ASTM standard increments of stranding and metal conductivity of 52.5% IACS, AC resistance at 60Hz
• Current ratings are based on 75^oC conductor temperature, 25^oC ambient, 2ft/s wind, 96/watts/sq.ft sun, 0.5 coefficients of emissivity and absorption.

 Specification of aac conductor