Suction Cup with Hook

Suction Cup with Hook; Wall Hook; Plastic hook;

1)Size: 5.7*3.8cm
2)Material:PS;

3)MOQ:300pcs

4)Lead time:25-30days;

5)Packing:

Packed in blister card,3pcs/card,and 160card/carton,

 CTN SIZE: 50*43*24cm; G.W/N.W: 7/6kgs;

 For the packing we can follow your demand ;

Method of Installation:

1)  Wipe away any dust,dirt,grease,etc,on the surface and let dry compeletly before installing.Wash and dry the suction crp.

2)   Press down in the center of the suction cup, then remove extra air by rubbing around the edge;

Use the precaution:

It will not cause the cliff side to damage,easy to install, convenient to dismantle, but it is a installlation utensil which utilizeds vaccum strength. Once the air enters it is apt to come off. To keep the suction, please follow the folling operation method:

1)When there are pollution and dust in cliff side and sucking disc,apt to come off,please remove clean;

2)Sucking disc apt occation that slip, can paint micro-oil in it(salad oil,etc),the oil film has result making the air and moisture content difficult to enter;

3)The old sucking disc coming off is often difficult to suck firm. Please pour boiling water into among bowl, after 5-6 minutes, use only after being dry to sock;

4)Hanging the weigh of thing can’t exceed weigh of limit;

5)Don’t hang clock, camera,mirror and such valuble Article;

You are at various choice for different  kinds of style , including simple,lovely,different color and shape.