608 ceramic bearings from Beijing

1.Pictures of 608 ceramic bearings

2.Descriptions of 608  ceramic bearings

1.Manufacture 608 ceramic bearings from 1995.

2.Excellent  and stable quality.

3.Plenty of stocks.

Like silicon nitride, zirconia ceramic bearing are also anti-magnetic, insulating, oil-free self-lubricating, corrosion resisting and high speed. They work in terrible conditions while the ordinary bearings cannot be qualified, and much cheaper than silicon nitride. They are widely used in aviation, aerospace, marine, petroleum, chemical, automotive, electronics, metallurgy, electric power, textile, medical equipment and other fields.

Rings:  

The rings (the inside and outside) are made by zirconia ceramic;

Rollers:

The rollers are made by zirconia ceramic too;

Retainers:

The retainers are made by PTFE, nylon 66, polyether acid sub-ammonia, stainless steel.
And we can produce deep groove ball bearing, full complement balls, self-aligning ball bearings, angular contact ball bearing, insert bearing of full zirconia ceramic.

Zirconia Material Properties

Performance Comparison of Structural Ceramics and Ordinary Steel

3.Production line of 608 ceramic bearings

4.Packaging of 608  ceramic bearings

5.Fair

We have been to a lot fairs and the lastest fair is 2015 HANNOVER MESSE Gemany.

6.Information of company

Founded in 1963, Beijing Sinoma Synthetic Crystals Co, LTD.Is a hi-tech state enterprise, belongs to the China National Materials Group Co., Ltd. An excellent technical team headed by the state-level experts has built up,which provides a reliable guarantee for the continuous and rapid technological development. 

Advanced ceramic Division (technical center of precision ceramic bearing) is mainly engaged in researching,manufacturing and developing advanced ceramic materials such as Si3N4, ZrO2, Al2O3 and so on.

Main Products:

1). Si3N4 and ZrO2 ceramic balls and rollers.

2). Si3N4 ceramic bearing rings.

3). The whole series full ceramic bearings, hybrid bearings, sliding bearings and shaft sleeves made by Si3N4 and ZrO2 materials.

4). Industrial wear parts made by Si3N4 and ZrO2 materials. According to customer’s application condition and drawings, varios precise and irregular ceramic parts can be designed and fabricated

7.Welcome to contact us