Cpi (Corrugated Plates Interceptor) Oil Water Separator

The CPI(corrugated plate interceptor) Oil Separator is an oil-water gravity separator, is suitable for oily wastewater treatment. CPI Oil Separator enables high efficiency gravity separation with corrugated plates, providing excellent treatability with a high flow rate.

The simple structure makes it possible to reduce the construction cost and facilitates maintenance.

Our Corrugated Plate Interceptor CPI is mainly used to remove bulk oil from the water.

The CPI basin can be executed in steel or concrete. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used. The steel CPI can optionally be supplied with integrated oil sump and/or effluent sumpt or with a gas-tight cover.

The corrugated plates are located at short intervals, providing high oil-water separation efficiency. This makes it possible to stably treat rainwater even when the amount of rainwater treated is two or even four times larger than usual.

Compared to the PPI (Parallel Plate Interceptor), the CPI Oil Separator requires about 2/3 the installation area, and the CPI Oil Separator has a relatively low construction cost.

The simple structure facilitates maintenance.

Main Applications of CPI(corrugated plate interceptor) Oil Separator:

Oil field oily waste water treatment

Refinery effluents and run-off

Petrochemical effluents and run-off

Airport or other large site rain run-off