LED Stadium Luminaires 250W with CREE LED, ETL/cETL,CE,SAA,IP66,ATEX,FCC,ROHS.CB,EN62471,DLC,LM79 approved

Specifications

  LED Stadium Light 250W

Special Feature :

 1. Quality Waterproof Driver with 5-year warranty(Taiwan Meanwell driver) 

A, High EMC,no interfere
B, Power factor>0.95
C, Power Efficiency>95%

D, UL, TUV, PSE compliance

2. High-performance Original CREE LED and perfect wiring design

Even if one led failed, the remaining LEDs will still work.  

3, Safety

A, CE, RoHS, PSE , ATEX, EN62471,IP66

B, IP66 test pass
C, Safe voltage output : 36VDC Max output 

D, 4000V Hi-pot test pass

4,Low Light Loss                      

The light source is the low light loss and high-bright LED, in which the loss is less than 5% for every 10,000 hours. The aluminum back-side housing performs an excellent heat dissipation, which guarantees a lower junction temperature of the LED, thus slowing down light loss. 

5,Environment-Friendly                      

While working, no ultraviolet light and infrared light radiation. And does not contain any hazardous substance, such as Lead and Mercury. 

6,Anti-vibration

Solid-state device. Can withstand Moderate vibrations 

7,Warranty Policy

5 years warranty with free collection and free delivery .

Application :

n      Recreation area lighting

n      Warehouse lighting

n      Sign lighting

n      Building lighting

n      Car park lighting

n      Perimeter fence lighting

n      Street lighting

n      Gas station lighting

Technical Specification :

Packing Details:

Caution & Warning:

1, To ensure the feature of water resistance , unauthorized person is not allowed to disassemble flood light construction .

2, The safety operating temperature is -40°C to +70°C . Make the product work in the circumstances with this temperature range . Otherwise the product will break down or components inside may have a shorter lifespan . The average temperature on the product body is 40-50 deg.Celsius . It is suggested the product is installed beyond the hand touch on the metal body .

3, Don’t give a stress on the front surface of the glass with more than 0.2MPA/m²

4, Please make sure the electricity is powered off before the maintenance .

5.If any doubt about the installation or use of this product, consult a competent electrician or technician .