8 Inch Round LED Panel Light

Specifications

Special Features: 

1.Imported Slim Light Guide Plate with light transmission rate at 80% could assure hight brightness.

2.External UL approval waterproof Power supply.

3.Warranty Policy : 3 years warranty with original written warranty; 20,000 switch cycles(on/off switching).

4.Low Light Attenuation

The light source is the low light attenuation and high-bright LED, which the attenuation is less than 30% in 50,000 hours.The aluminum back-side housing performs an excellent heat dissipation,which guarantees a lower PN junction temperature of the LED,thus avoid light decay.

5.Environment-Friendly
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Mercury.

6. Eyes Protection

Diffused PC-cover, homogeneous light emitting(just the same as the traditional fluorescent performs,but not like the clear PC-cover ones that might give tens of thousands of shadows), good for eyes; adopting constant current power supply, no Strobing, no harm the eyes.

7. Anti-vibration

Solid-state,anti-vibration, not easy to be broken. Can be recessed mounted or work as a pendant.

Application:   

1.Office lighting

2.Hotel lighting

3.Super market lighting

4.Warehouse lighting

5. Airport lighting

6.Factory lighting

7.Classroom lighting

Technical Parameter:

Light distribution Curve ( IES File available, please contact us )

Caution & Warning

1.Use indoor or some place where no water.

2.Work under the fixed voltage.

3.Pls operate in the right way when you install the LED panel light in case to avoid the power harm and body harm. When installing, please note the short-circuit protect such as the socket with the fuse.

4.  non-dimmable

5,  If any doubt about the installation or use of this product, consult a competent electrician or technician .