LED Neon light Flex Rope Light accessroy Front connector

Specifications

Led neon flex stripe series:

When you find my webpage and you will feel glad that you can say farewell to high cost Advertise board and complicated installation and constant  maintainment and even discontented design. Our annoucement is do it yourself, make your real signs as you wish! 

With our materials, you can be professional as well. Please contact us for more :-)

Advice:

1. For long meters designs , high power 220~240V or 110~120V is best choose to install

    where people is not touchable hight.
2. Backgroud for the sideeffect of brightness, the professional version is ideal choice! Pure

     light!
3. Backgroud application for outline merely, the general version or economical version is good

     enough!
4. For small sign size, the ultrathin or mini neon flex strip is your answer
5. To make daytime remarkable as well, the color cover jecket is the best one!
6. In Bars and club where people easy to touch, we suggest to use low power version although

     the thick PVC is isolation
7. The neon Flex body can reach IP 65, but the connectors are not, If you use at outdoor or

    Swimming poor , please keep the connector in well protection!
8. Rainbow or color chasing is available by our SLC1XXX,  or SLC2XXX, last three number is

    voltage, like SLC1120 or SLC1024.
9. Read carefully the user manual before you start your job!

Accessories:

*Plastic clip,   Item no#001   Clip with four screws
*Channels: PVC channel 2m   Item No# 200P  or mini Channel 5cm, Item No# 005P
*Aluminum channel 2m           Item No# 200A  or mini Channel 5cm, Item No# 005A
*Male Pin                                Item No#002
*X connector  X connetor +4 male pins+4 shrink tube              Item No# 003X
*T connector  T connector +2 male pins+2 shrink tube             Item No# 003T
*L connector  L connector +2 male pins+2 shrink tube             Item No# 003L
*Front connector to powerA: Plug according to your country or demands + power code +

  Transformer( for low power)+ AC/DC convertor +female connector + male pin+shrink tube  

                                              Item No#004A
*Front connector to powerB: Power code + AC/DC convertor +female connector + male

   pin+shrink tube                  Item No#004B
*Front connector to powerC: Power code + female connector + male pin+shrink tube 

                                              Item No#004C
*Front connector to controllerSLC1XXX: Connector + power code +  +female connector + male

  pin+shrink tube                    Item No#004D
*Front connector to controllerSLC2XXX: Connector + power code +  +female connector + male

 pin+shrink tube                     Item No#004E
*Splice connector: male pin + shrink tube    Item No#006S
*Middle connector  2 female connectors + 2 male pin +Heat shrink tube+ costumed cable 

                                                               Item No#006M
*End connector:  end cap                       Item No#007
*Shrink tubes                                         Item No#008
*Glue  PVC Glue  40g/piece                    Item No#009

How to name our Accessaries:

First you need to know our directory

SLN00XX  Milky cover  jacket              Crosssection 27.5*24mm
SLN20XX  Crystle color cover jacket   Crosssection 27.5*24mm
SLN30XX  Color cover jacket              Crosssection 27.5*24mm
SLN50XX  Ultrthin color cover jacket  Crosssection25*8mm
SLN60XX  Mini color cover jacket       Crosssection 24*11mm
SLN70XX  Round color cover             Crosssection 28mm
SLN80XX  Round milky cover            Crosssection 28mm
SLN40XX  RGB version                     Crosssection 26*20mm

The add or accessary code no after our neoflex pattern.

For example
S (summit) + L (LED) + N ( neon) + A ( accessory)

SLNA00 Type name+ 001 accessory item code,  SLNA00001 is our Pastic clip for milky cover jacket verion with 27.5*24mm section.
SLNA40  Tpye name + 004D, we know you will use our SLC controller  to drive and control the RGB neon flex strip!