LED Rope Light Neon Flex Accessory T Connector

Specifications

Led neon flex stripe series:

When you find my webpage and you will feel glad that you can say farewell to high cost Advertise board and complicated installation and constant  maintainment and even discontented design. Our annoucement is do it yourself, make your real signs as you wish! 

With our materials, you can be professional as well. Please contact us for more :-)

Advice:

1. For long meters designs , high power 220~240V or 110~120V is best choose to install

    where people is not touchable hight.
2. Backgroud for the sideeffect of brightness, the professional version is ideal choice! Pure

     light!
3. Backgroud application for outline merely, the general version or economical version is good

     enough!
4. For small sign size, the ultrathin or mini neon flex strip is your answer
5. To make daytime remarkable as well, the color cover jecket is the best one!
6. In Bars and club where people easy to touch, we suggest to use low power version although

     the thick PVC is isolation
7. The neon Flex body can reach IP 65, but the connectors are not, If you use at outdoor or

    Swimming poor , please keep the connection in well protection!
8. Rainbow or color chasing is available by our SLC1XXX,  or SLC2XXX, last three number is

    voltage, like SLC1120 or SLC1024.
9. Read carefully the user manual before you start your job!

Accessories:

*Plastic clip,                           Item no#001        Clip with four screws
*Channels: PVC channel 2m Item No# 200P  or mini Channel 5cm, Item No# 005P
*Aluminum channel 2m          Item No# 200A  or mini Channel 5cm, Item No# 005A
*Male Pin                               Item No#002
*X connection  X connetor +4 male pins+4 shrink tube              Item No# 003X
*T connection  T connector +2 male pins+2 shrink tube             Item No# 003T
*L connection  L connector +2 male pins+2 shrink tube             Item No# 003L
*Front connector to powerA: Plug according to your country or demands + power code +

  Transformer( for low power)+ AC/DC convertor +female connector + male pin+shrink tube  

                                              Item No#004A
*Front connector to powerB: Power code + AC/DC convertor +female connector + male

   pin+shrink tube                  Item No#004B
*Front connector to powerC: Power code + female connector + male pin+shrink tube 

                                              Item No#004C
*Front connector to controllerSLC1XXX: Connector + power code +  +female connector + male

  pin+shrink tube                   Item No#004D
*Front connector to controllerSLC2XXX: Connector + power code +  +female connector + male

 pin+shrink tube                    Item No#004E
*Splice connector: male pin + shrink tube    Item No#006S
*Middle connector  2 female connectors + 2 male pin +Heat shrink tube+ costumed cable 

                                              Item No#006M
*End connector:  end cap             Item No#007
*Shrink tubes                                Item No#008
*Glue  PVC Glue  40g/piece           Item No#009

How to name our Accessaries:

First you need to know our directory

SLN00XX  Milky cover  jacket                   Crosssection 27.5*24mm
SLN20XX  Crystle color cover jacket        Crosssection 27.5*24mm
SLN30XX  Color cover jacket                   Crosssection 27.5*24mm
SLN50XX  Ultrthin color cover jacket       Crosssection25*8mm
SLN60XX  Mini color cover jacket             Crosssection 24*11mm
SLN70XX  Round color cover                   Crosssection 28mm
SLN80XX  Round milky cover                   Crosssection 28mm
SLN40XX  RGB version                             Crosssection 26*20mm

The add or accessary code no after our neoflex pattern.

For example
S (summit) + L (LED) + F( neon Flex) + A ( accessory)

SLNA 00 Type name+ 001 accessory item code,  SLNA00001 is our Pastic clip for milky cover jacket verion with 27.5*24mm section.
SLNA40  Tpye name + 004D, we know you will use our SLC controller  to drive and control the RGB neon flex strip!