Cast Stainless Steel Cut Wire Shot 0.2mm for Shot Blasting Machine

1)Bonzer Stainless steel cut-wire shot   is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non ferrous work objects could be harmful.

We offer shots in different grades like SUS304, SUS316, SUS202, SUS410, SUS430 according to customers’ need.

 It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work objects that are subject to stress corrosion cracking.

2)Size: 0.2mm,0.3mm,0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm

3)Appearance:

As-Cut: Due to its sharp edge, it works good for cleaning where speed of cleaning is critical and somewhat rough finish is acceptable.But as-cut shot is not advisable to use for peening  operation.

Conditioned: Cut shots which are rounded off are used more in the shot peening process, also in different industries such as automotive industry, aerospace industry, shipping industry.

4)Product Photos

5)Technical Parameter

6)The advantage

Cut wire does not fracture or breakdown during use because it is solid.  As a result several positive things occur:

1.Stainless cut wire shot has a significantly longer useful life than cast steel shot and grit

2.Dust generation is significantly lower so blasting operations are much cleaner

3.Stainless cut wire produces excellent results because of its uniformity and strength

4.It will make you a "Greener" organization because disposal of spent media will be significantly reduced

5.No ferrous contamination to non ferrous castings or work objects