Dustless Sand Blasting Room from China Supplier WIth ISO Certificate

With the Blasting Room, Air Blasting System, Sand Circulatory System, Dehumidify System and  Dust  Collector. 

1.Blast Room Enclosure Size 

Enclosure size is determined by the size of the largest part that will be blasted. Standard sizes range from 8' by 8' square to 20' wide by 40' deep and up to 16' tall.  

Larger sizes are available. 

2.Material Handling Method 

Parts are transported according to your plant operations and part specifications. Options for loading parts into the blast chamber include forklift, work car on rails, dedicated monorail or overhead crane.

3.Work Door Configuration

The type of doors is determined by the material handling method, part size, plant operations and budget. Door options include: double swing doors, roll-up doors and sliding doors. Drive through systems with doors on both ends are available. 

4.Abrasive Reclaim System

The reclaim system is determined by the type of abrasive being used, (screw conveyor vs.vacuum reclaim), your production requirements and budget. Full reclaim floors are more costly but provide

continuous automatic recycling of abrasive. Partial reclaims and corner boxes require the operator

to sweep the abrasive to the reclaim system.If your parts are to be handled by forklifts, the reclaim

system must accommodate heavy floor loading. 

5.Control system

PLC control, Error warning system on abrasive circle system, any error come, the above work will stop automatic.Control function under Automatic control, hand controller and maintenance states will be control, so there are cascading protection feature among each process.

6.dust remove system

Abrator dust stream generated when working through the primary separator and connecting pipe,

and then flow into the deposition of dust box, large particles are deposited, a small pipe into the dust and then by pulse jet bag filter. Emissions of dust concentration after not more than 80mg/m3, in line with the provisions of the National Environmental Protection Agency emission standards not higher than 120mg/m3.

7. Shot distributing system

This machine adopts the patented shot valve produced of our company; it can accumulate a certain time in blast-peening, through the manual control to provide the shot ball to the blast-peening device.

1.High quality and compatitive price

2.OEM and ODM are avaliable

3.ISO,CE.BV Certifications

4.Payment Protection

5.On-time Shipment

6.Product quality protection

7.On-time feedback

8.10 professional engineers team

1Blast cleaning:Used for blast cleaning of casting, die casting,forging,sand removal of casting, steel plate, 

H type steel, steel structure.

2Rust removal:Rust removal of casting, forging, steel plate, H type steel, steel structure, descaling of  forging.

3)Shot peening:Shot peening of gear, heat treatment.

4)Shot blasting:Shot blasting of profile steel,ship board,steel board,steel material

5)Pretreatment:Pretreatment of surface, steel board, profile steel, steel structure, before painting.

1.Payment Term

1.T/T,30% deposit, 70% before shipment

2.L/C irrevocable L/C at sight

2.MOQ

1 SET

3.Delivery Time

Depond on the machine