Best Quality Industrial Flake Ice Machine From 1ton to 60tons

industrial flake ice machine

1. About Ice Flake Machines  

1.The temperature of ice is lower and it can reach -6°c.
2.Ice is dry and transparent, good looking shape, non-caked, good mobility and sanitary.

3.Flake shape has no sharp edges, cannot destroy refrigerating products, and it is beneficial for storage and transportation.

4.The thickness of flake ice is 1mm-2mm.No need to crush and can use at any time.

5. Daily capacity of ice flake machine can be from 0.5ton to 60tons.

2. Ice Flake Machines

  Note:

The above information is according to adopt water cooled condenser.

Size of machine is before installation.

 It didn't mention size of cooling tower, cooling tower usually install in the outside.

Machine running condition: water temperature: 23Centi degrees, evaporate temperature: -23Centi degrees, condensing temperature 40Centi degrees, reference valve under 50Hz power supply. Real production of machine will have a little change according to change of water temperature and ambient temperature.

3.Customers:

We have customer in China, Malaysia, Indonesia, Philippine, Maldives, Vietnam, Thailand, Myanmar(Burma), Dubai, Syria, Iran, Saudi Arabia, Egypt, Lebanon, Sudan, Oman, Mexico, Venezuela, Argentina, Nigeria, Angola, Congo, South Africa, Niger, Benin, Cameroon, Burkina Faso, Guinea, Guinea-Bissau, Mozambique, Papua New Guinea……

Welcome more and more customers come to us, visit our factory and give us suggestion, let us make progress, thanks!

Packing:

1. Standard wooden case.

2. Completely ice machine contain: ice machine, cooling tower, water pump, water pipes and water pipe fittings.

3. Machine come into use, customer only need prepare power for the machine.

4. All required components for install the machine will be provided.

Ice Flake Machines:

1.Q: are you add refrigerant in the ice machine?

    A: yes, the machine is full of refrigerant, once with water and electric it can work. yes, ice machine leaves factory with carefully examination after it was produced for 3 to 5 days. And when we install them at customer’s factory, we retest the ice machines.

2.Q:do you test the ice machine in your factory?

   A: yes, ice machine leaves factory with carefully examination after it was produced for 3 to 5 days. And when we install them at customer’s factory, we retest the ice machines.

3.Q: can you load ice machine into container?

   A: we have containerized ice block machine. Our export ice machine is designed based on the standard of container, it is easily to load. The 25kg ice of 10tons can load in container of 40 feet. for domestic ice machine of over 12 tons per day, we design based on the standard of truck, which can easily drive into your factory.

4.Q: all your ice machine is based on 380V 50HZ power requirement? Do you have the right power requirement for abord? Such as 440V 60HZ or 220V three phase that suitable for America?

   A: our ice machine and power,voltage can suitable for your country, please make the power requirement be clear in your order.