LPB17 Aeration Butterfly Valve with Pneumatic Actuator - Lapar Valve

Specifications

Aeration Butterfly Valve with Pneumatic Actuator

1. Uses the center-line type structure

2. Easy installation, low flow resistance, large circulation

3. Applied to chemical, building materials, power station, glass industry etc

LPB17 Aeration Butterfly Valve with Pneumatic Actuator - Lapar Valve

Parameter

Design Featurer

• Body: The body is welded by steel plate for lighter weight .smaller volume,lower cost,and choosing high temperature resistant material can withstand higher
• temperature.
• V type packing: The sulfur-free flexible v-graphite packing overcomes the faults of normal packing including zero compensation and large deformation,
• prolongs the service life, and is able to with stand high temperature.
• Seat: The seat ring can reduce leakage and ensure the disc close to 0°.
• Disc: The disc is made of steel plate,and stiffeners in both sides can make it withstand deformation due to wind effectively.
• Ring: The ring has a location effect,which makes the disc turn in the middle of channel.

Standard

• Valve body is designed to meet IEC60534-3-1-2001 and GB/T 12221-2005 API609
• Valve mounting flange shall be per ISO 5211
• Flange Standard: JB/T79.1-94,JB/T79.4-94. HG20616-97,ANSI B16.5,ANSI B16.47
• The highest pressure: 1 .OMPa, Temperature range: -196°C ~1100°C
• Leak standard: ANSI B16.104

Main Feature

• Medium can flow through the body directly for little resistance and high flow capacity
• The body and cover could be made of carbon steel,austenitic stainless steel or special alloy material
• The sulfur-free flexible v-graphite is heat resisting ,we shall ensure the service life of packing is long-term without maintenance by increasing pre-pressure on spring gasket
• Center line-type butterfly valve uses metal sealing seat,which surrounds the disc to reduce the leakage effectively