ISO 9001 Factory YEM024SJ Three Phase Four Wire Electronic Din Rail Active Energy Meter , LCD Display Energy Meter /

Model YEM024SJ three phase four wire electronic DIN rail active energy meter is a kind of

new style three phase four wire electronic active energy meter, it adopts micro-electronics

technique, and imported large scale integrate circuit, uses advanced technique of digital

and SMT techniques, etc. It has its completely independent intellectual property rights and

minimum size, and also a new three phase four wire active energy meter. The meter

completely accords with relevant technical requirements of class 1 three phase active

energy meter stipulated in international standard IEC 62053-21. It can accurately and

directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC

electricity net. This meter has white backlight source eight digits LCD displays shows the

active energy consumption. It has following features: good reliability, small volume, light

weight, specious nice appearance, convenient installation, etc.

1. 35mm standard DIN- rail installation, complying with standard DIN EN50022.
2. Four pole width (Modulus 17.5mm), complying with standard DIN43880.
3. Standard configuration 7+1 digits display (9999999.1kWh) by white backlight source LCD. May select7+1 digits display (999999.1kWh) without backlight source general LCD, (Product Configuration code is SK).
4. Standard configuration pulse output passive (polarity),May select distant impulse output passive (nonpolarity).And contact with all kind of AMR system conveniently,Complying with standard IEC 62053-31 and DIN 43864.
5. Four LED respectively instructions every power supply state and signal of energy impulse.
6. Automatic detection the direction of the flow of load current. And Instructions on individual LED
7. Single direction three components measure three phase four wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
8. Directly connect operation, type S wiring (inlet from top, outlet from bottom).
9. Extension terminals cover,in order to protect to use safety.