2G 3G 4G signal booster GSM WCDMA LTE repeater booster amplifier

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

824-849MHz

869-894MHz

Frequency Range(MHz)

Nominal Frequency

1.5G or 1.8G

Gain(dB)

Nominal Output Power-5dB

50±3(Station Couple)

>80(Air Receive)

Output Power (dBm)

GSM modulating signal

0(Station Couple)

37

33(Air Receive)

37

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-band(Max. Gain)

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

Time Delay (us)

Working in-band

≤5

Peak Phase Error(°)

Working in-band

≤20

RMS Phase Error (°)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

1920 – 1980MHz 

2110 - 2170MHz

Gain(dB) 

Nominal Output Power-5dB

95±3

Number of channels

Max.4

Output Power (dBm)

GSM modulating signal

30

40

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-band(Max. Gain)

≤6

Ripple in-band (dB)

Nominal Output Power -5dB

≤2.0 (3.84MHz)

Time Delay (us)

Working in-band

≤12

EVM(%)

Working in-band

≤12.5

PCDE (dB)

Working in-band

≤35

ACLR(dBc)

±5MHz

Working in-band

≥-45

±10MHz

Working in-band

≥-50

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

A.Signals in many cottage areas are marginal and cannot penetrate the walls of your cottage. Kingtone repeater can be easily deployed to provide coverage throughout your cottage. In a cottage, the donor unit is generally deployed outside – for example, under the eaves or on a utility pole. Because it is more sensitive than your phone and is mounted higher up, it can usually detect signals that your phone can't. The coverage range of 15,000 to 50,000 square feet (2,000 to 4,600 square metres) is adequate for most cottages.

You get the privacy of your cottage and the convenience of your cell phone. Just remember to turn it off sometimes!

A. Factories and warehouses with lots of metal construction often have poor signals. While these buildings may be large, the employees are generally located in only a few areas.

Kingtone repeater can be easily deployed to provide coverage in those spots. The donor unit is deployed on the roof and connected to a coverage unit inside. The coverage range of up to 100,000 square feet is adequate for most trouble spots. Multiple units can be easily deployed to cover office areas and other working locations.

Kingtone repeater an provide coverage in parking garages above and below ground. That's useful for emergencies, and it removes the irritation of calls being dropped when you park your car.

The donor unit is placed where it can detect a signal (this might be outside or in a stairwell). It is connected to the coverage unit, which is placed in the centre of the garage up to 245 feet (75 metres) away.

A. Kingtone repeater can be deployed completely within your office. It is the only in-building in-building solution.

The donor unit needs to be placed somewhere where it can detect a signal (this might be beside a window or the outside wall). The coverage unit is then placed roughly in the centre of the problem area. Ideally, the two units are separated as much as possible.

For esthetic purposes, the entire system can be placed above the ceiling tiles.

B. why choose Kingtone?