48V 1.5A 72W AC Power Adapter

Specifications

48V 1.5A 72W AC Power Adapter

Specification
Output max power:20-150W
All range voltage input
High efficiency,low loss
European commission of energy
Built in EMC/EMI filter
You can chose the output voltage/current arbitrarily
Widely used in the electronic digital,communication,security,lighting,medical,etc.

Electric performance
Input voltage:AC 110-240V
Output voltage:DC 48V
Output current:1.5A
Input current(max):0.36A
Input frequency:47-63HZ
Depletion(no load):<0.3W min
Efficiency(max):85%
Protection
Over current protection
Over power protection
Over voltage protection
Environmental and reliability
Operating temperature:0-40C
Operating humidity:10-90%RH
Storage temperature:-20-+80C
Storage humidity:5-90%RH
Leakage current:0.25mA max

AC Input Voltage.............100~240V AC 47~63 Hz

Inrush Current..............<30A(AC 240V  at 25°C)

input Current Limiting..............<2.5A(under min AC input and full load)

Efficiency..............>80%

DC Voltage Regulation

DC Output Current

Output Ripple & Noise.............  50 mVp-p@ 25 degrees C

Output Dynamic Load Response

Overshoot at turn-on/ turn-off.............<10%

SCP...........<0.1 ohms

OCPlimits.........6A

Hold up time...........>5mS(100Vac/47Hz),>10mS(110/220Vacc/50/60Hz)

Start up time..........<3S(100Vac/47Hz),<2S(110/220Vac/50/60Hz)

Working temp...........0°C~ 40°C

Storage temp Range..........-10°C~ +85°C

Working humidity..........25%~90% relative humidity (Non- condensing)

Storage humidity Range..........10%~90% relative humidity (Non- condensing)

MTBF............ 50K hours (25°C , Full load and rated voltage input)

Standards............Meet IEC60950-1standard requirement

Leakage Current.............not exceed 0.25mA at 220Vac/50Hz

Insulation Resistance...........≥50MΩ ,500VDC

100%Hi-pot  test

After service
This product can be repair within one year for any defects or irregularities caused by the factory.
Remarks
Indooruse only
Usein dry environment
Donot open the charger if not professional person
Usagedguide
1.insertthe AC adapter prongs fully into the wall outlet.
2.Regmovehe AC adapter from the wall outlet when it is fully charged or not in use
Packing
1.Inner package:PEbag,white box or as your demand
2.Outer package:Carton or according your requirement

Output voltage and current 

Conduction and Eradiate