Specifications

Euro plug wall type AC DC 12v 1.2a power supply

1. Application
battery,cigarette lighter,GPS,microscope,and so on.
2.General specification

3. Electrical Specification
Input Voltage: AC100-240V
Output voltage: DC 12V
Output current: 1.2A
Maximum power: 14.4W
Efficient: >80%
Ripple and noise: 1%×VO
4. Structured specification
Weight: 78g around
Volume: Check product pictures
Warranty: 1 year
5. Protection
Over voltage protection: 120%min
Over current protection: 120%min
Over load protection: 5%
Short-circuit protection: automatic recovery
Advantages of our charger:
As a professional power supplier manufacture, we can offer you products with all these advantages, which trade companies can not compare.
1. AC DC plug optional: EN,UK,US,SK, AU and GB plug
2. With short circuit, over-voltage, over-current and overload protection.
3. Compact size, easily portable
4. 100% full-load burning tests
5. High efficiency, low Power consumption
6. soft-start current can reduce the AC input impact efficiency
7. Safety Approvals: CE, FCC and others
8. Good quality, 2 years warranty.
9. on/off switch on the cord.

Typical model list

AC Input Voltage.............100~240V AC 47~63 Hz

Inrush Current..............<30A(AC 240V  at 25°C)

input Current Limiting..............<2.5A(under min AC input and full load)

Efficiency..............>80%

DC Voltage Regulation

DC Output Current

Output Ripple & Noise.............  120 mVp-p@ 25 degrees C

Output Dynamic Load Response

Overshoot at turn-on/ turn-off.............<10%

SCP...........<0.1 ohms

OCPlimits.........1.5A

Hold up time...........>5mS(100Vac/47Hz),>10mS(110/220Vacc/50/60Hz)

Start up time..........<3S(100Vac/47Hz),<2S(110/220Vac/50/60Hz)

Working temp...........0°C~ 40°C

Storage temp Range..........-10°C~ +85°C

Working humidity..........25%~90% relative humidity (Non- condensing)

Storage humidity Range..........10%~90% relative humidity (Non- condensing)

MTBF............ 50K hours (25°C , Full load and rated voltage input)

Standards............Meet IEC60950-1standard requirement

Leakage Current.............not exceed 0.25mA at 220Vac/50Hz

Insulation Resistance...........≥50MΩ ,500VDC

100%Hi-pot  test

Packing
1.Inner package:PE bag,white box,color box ,blister package or as your demand.
2.Outer package:Carton or as your demand.
This product can be repair within one year for any defects or irregularities caused by the factory.

Remarks
Indoor use only
Use in dry environment
Do not open the charger if not professional person
Usaged guide
1.insert the AC adapter prongs fully into the wall outlet.
2.Regmove he AC adapter from the wall outlet when it is fully charged or not in use

Output voltage and current

Conduction and eradiate

Euro plug wall type AC DC 12v 1.2a power supply