400 Square Meters Cover Plastic Tyre Pyrolysis Recycling Plant

• HuaYin is specializing in manufacture waste tires pyrolysis plant, waste plastics pyrolysis plant and oil distillation plant.
• Factory was build in 1993.
• Have running plant factory, welcome to visit us.
•  Turn waste into wealth with green technology, no pollution,
• Help you choose the best and profitable machine.
• Send experienced engineer instruct you install the machine, and help you training your workers..

  Through this device

• No need shred tires, could loading complete tires directly
• Begain another batch directly,no need wait the temperature cooling down, use residual heat advantage
• No need manpower go inside reactor, safety
• 2-3 hours could finish loading, high efficiency
• 50 ton hydraulic, powerful, could make full use of the reactor room

Waste Tire Pyrolysis Plant Cooling system directly related with the oil yield rate

For our cooling system, we have three steps

First setp, cooling pipe.

Two layers, inner will be oil gas, out side will be covered by water, here heavy oil

will be recycled, go into first heavy oil tank through oil-water separator.

Second step, Condenser. We have two different design---- Horizontal condenser

and Vertical condenser.

Each condenser has 57 small gas pipes inside. Water will be outside and covered

all these 57 small pipes, heat will be flowed out together with the flowing water.

Here light oil will be recycled, go into second light oil tank.

Third step, residual gas cooling system, here the oil quality is very good, also go

into second light oil tank.

Through these three steps, cooling effect could be guaranteed, as well as oil yield

rate.

Cooling pipe

Vertical condenser

Horizontal condenser

Reactor directly decides the machine's safety and service life.

• Bare reactor, inner and outside are welded by auto-wedling machine.
• Inlet and output are in one central line, and supported by rollers, in this way, could make it running stabile, even after long time steel plate deformed.
• Use standard gear, which is separate from reactor instead of welding on reactor, could avoid deformation after long time heating.
• Outside cover has three layers, use special insulation material, could achieve a good effect of heat preservation.
• Made by Q345R boiler plate, safety and long service life.

• We will send one of our engineer to your factory, instruct you install and testing the machine, help you training your workers.
• Warrenty will be one year.
• Produce machine according to your special request.