VM High pressure multistage stainless steel water pump

VM High pressure multistage stainless steel water pump

 Features

* Straight shaft structure, 2-pole motor,single phase with thermal protector

* Inlet and outlet section are cast iron,

* Impeller and hydraulic stack are PPO, It's economic and high cost-effective multistage pump

RANGE OF PERFORMANCE
8Flow rate up to 108 l/min (6.5 m³/h)
8Head up to 105m

LIMITS OF USE

 8Non-flammable or non-explosive clean liquid without solid grain or fibre.
8Liquid temperature up to 5 °C -  +60°C
8Environment temperature up to ≤  50°C

8Max. working pressure: 1.0 Mpa

INSTALLATION 
8These pumps are suitable for handling clean water without abrasive particles and liquids that are chemically
non-aggressive to the pump components. Reliable, economical and simple to use, they are suitable for
domestic use and in particular for distributing water in combination with small pressure sets, for irrigating gardens.
The pumps must be installed in a covered area, protected against the inclement weather.

MOTOR
8Two –pole induction motor (n=2850rpm)
8Insulation Class F
8Protection grade IP55

MATERIALS
8Pump body: Cast iron with stainless steel.
8Pump support: Cast iron
8Motor housing: Aluminum
8Impeller: PPO
8Shaft with rotor: AISI420 stainless steel
8Mechanical seal: NBR/ Ceramic/ Carbon
8Bearing:  NSK, C&U, or local quality.

WARRANTY: 1 YEAR (according to our general sales conditions)

Performance Curve

Shape and Size of Installation

Three-phase 220/380V-50Hz (60hz), single phase 220V/60Hz, 110V/60Hz, 127V/60Hz & 110V/220V/60Hz are available on request.

PRODUCTION PROCESS SCHEME

              SS304 impeller                                                   Busher

                            Flange                                        Middle connect diffuser

                    Rotor & Stator                                        Mechanical  Seal