3000L/H Industrial RO Water Plant/ RO Water Treatment System

Specifications

3000L/H Industrial RO Water Treatment System/Plant

Design basis and treated water standard:
1. Design Basis

1.1 Produced water’s application: Pure drinking water
1.2 The capacity of produced water: 3000L /H

1.3 System Configuration: Pretreatment + One Stage Reverse Osmosis Desalination System.

1.4 Designed recovery: 50-65%.

1.5 Rejection rate:≥ 97%

1.6 Voltage: 3 phases, 380V, 50Hz; Power: 5.2 KW

Process:

Water Source>>Raw Water Tank>> Booster Pump>> Sand Filter>> Carbon Filter>> Security Filter >> High pressure pump>> R.O.System>> Pure Water Tank

                          ↑Ozone Generator

Features of Electric Control:

1)Inlet low pressure protection switch of high-pressure pump:

Linkage with the high-pressure pump, pressure below the set value, high-pressure pump will stop running.

2) The membrane inlet high pressure protection switch:

Linkage with the high-pressure pump, if operated high pressure too high, the membrane will be easy get blocked, even penetrated. When the membrane system operating pressure exceeds the setting value, the high-pressure pump will stop running.

3) The reverse osmosis unit equipped with low pressure automatic flush valve:

Linkage with the high-pressure pump, set by the time relay, when the reverse osmosis unit start to work, the system auto startup, washing the film surface with large-flow, so the sediments on membrane surface washed away in time, to ensure the normal operation of membrane.

4) Raw water tank / pure water tank high and low level control switch

The raw water pump / high pressure pump linkage, the raw water tank at low level, the raw pump automatic shutdown for protection, when pure water tank full, high-pressure pump to stop.

Reverse Osmosis

A semi-permeable membrane, like the membrane of a cell wall or a bladder, is selective about what it allows to pass through, and what it prevents from passing. These membranes in general pass water very easily because of its small molecular size; but also prevent many other contaminants from passing by trapping them. Water will typically be present on both sides of the membrane, with each side having a different concentration of dissolved minerals. Since the water i the less concentrated solution seeks to dilute the more concentrated solution, water will pass through the membrane from the lower concentration side to the greater concentration side. Eventually, osmotic pressure (seen in the diagram below as the pressure created by the difference in water levels) will counter the diffusion process exactly, and an equilibrium will form.  

The process of reverse osmosis forces water with a greater concentration of contaminants (the source water) into a tank containing water with an extremely low concentration of contaminants (the processed water). High water pressure on the source side is used to "reverse" the natural osmotic process, with the semi-permeable membrane still permitting the passage of water while rejecting most of the other contaminants. The specific process through which this occurs is called ion exclusion, in which a concentration of ions at the membrane surface from a barrier that allows other water molecules to pass through while excluding other substances.

Pictures:

After Sales Service:

1. Lifetime Free Consulting maintenance

2.  Warrenty: One year, during warrenty period, if any parts broke out, we will send you free spare parts to replace.

3. Engneering sevice for installation & technical training at user's workshop are available.(need addtional labor cost and customers arrange air ticket)

4. We could also help you on bottle design drawing, factory construction design, machineies installation layout.

5. With free spare parts, English version manual & electric dagrams.