Vacuum lifting equipment for glass

Specifications

 Vacuum lifting equipment for glass

Glass lifting equipment 

The equipment specifications as below:

1. Model Number: GLB1500-14-T

2. Max. carrying capacity is 2400kg ( a safety factor 4.0 include)

3. Description:

   Designed for use with a crane or other hoisting equipment. The vacuum Lifer employs vacuum to hold a load for lifting,

1. Power Supply: 380V,50HZ, 3PHASE

2. Vacuum pads diameter: 23cm nominal diameter. Lipped (P230FN)

3. Load capacity: (rated at [-60kPa] on clean, smooth, nonporous flat surfaces)

4. Per-pad: 249kg   Safety suction force: 2400kg

5. Load Movement:

   Vertical handling

6. Standard Features:

   Low vacuum warning light

   On-board battery and charger

   Battery energy gauge

   Vacuum gauge

   Vacuum line filter

   Vacuum reserve tank

   Spring-mounted vacuum pads

   Movable vacuum pad mounts

   Vacuum pad extension arms

7. Manual valve is connected to suction cup separately and the operator can shut off individual suction cup according to the dimension of workpiece. This function is also useful for the self-check of vacuum reservoir.

8. The vacuum lifter is equipped with a buzzer and warning light units, in case of a power failure or vacuum leakage, an optical and an acoustic signal goes off immediately to warn the operator to do emergency operation.

9. The vacuum lifter is equipped with Vacuum reservoir tank helps prevent      immediate vacuum loss in case of power failure and extends battery life by reducing pump cycles required to maintain vacuum. when the power is turned off in sudden, always can keep the workpiece not falling down for 5 minutes. Won’t bring about equipment damaged, etc Safe accidents.(EU CE standard for 5 minutes);

10. Operating Temperatures range: 32° to 104 °F(0°to 40 °)

The design of vacuum lifter by our company is passed to EU CE 13155 passed. It is CE identification Product.