Automatic Cut Off Protection Switch

Specifications

Automatic Cut Off Protection Switch

Characteristics:

1.F-1 is used for flow control or cut-off protection. When the flow reaches the setting  volume, the switch turns on/off automatically.

2.The setting point is adjustable.

3.Suitable mediums are water, oil, glycol and other non-hazard liquid.

4.Standard 1” NPT or other special connecting.

5.Maximum working pressure: 10bar.

6.Five paddles to fit with pipes of different diameters.

7.Temperature of medium: 0~+120ºC.

Installation:

1.Select a proper paddle based on the piping dimension to conduct the integrated assembly. In order to prevent from damage of the paddle by impact of abnormal liquid flow, it is suggested assembling an additional paddle on its adjacent back against the flow direction.

2.F-1 must be installed on a straight pipeline with a length of at least five times of pipe diameter.

3.When inserting the triplet, the wrench must be operated on the plane. Holding the switch body is not allowed.

4.the paddle must be kept in a right angle with the flow direction. The paddle should not be touched the pipeline or any throttle on the pipeline.

5.If any other valve is installed on downstream, F-1 must be equipped with a proper throttle.

6.F-1 must be installed on the horizontal line or upward of the vertical line. It is not allowed to install it on the downward flow.

7.F-1 is with a factory set minimum flow rate . Operation below this value is not allowed.

Ordering information:

1.Standard parts refer to connection size & minimum flow factory setting.

2.Flow volume listed in the technical data is reference for production selection only.

3.If you have special requirement, please contact STF.

Parameter:

Packaging and Shipping:

Packaging Detail: normally closed Export cartons:31*25*21cm then into plastic pallet

Delivery Detail:  15days after receiving deposit

Our Service:

1)our advantage:we are the manufacturer with more than 60 years experience in valves. Best price,quality and service, Also we can control the production status.

Shanghai Thermostat team with strong ability in designing and after sell service. Cooperation with Carrier has improved our quality to a new level.

2)Terms of payment: T/T, L/C, Western union.

3)Shipment: average 20-25days after receiving deposit.

4)Delivery:  Shanghai ,by sea or air.

5)Gurantee: One year since delivery.

6)Inspection: 100% testing for all the valves.

7) All kinds of CERTIFICATE OF ORIGIN.

Welcome to choose Shanghai Thermostat , We are always ready!

Company Information:

1.Company and Stuff

2.Production Line:

3.Certificates:

FAQ:

1.Q: What is your main market?

   A: Our main market is north America, especially USA.

2.Q: Are you products standard?

   A: Our model is standard, if you have specific demand, pls tell us.

3.Q: Do you have interest to do our own design items?

   A: Absolutely! We have big interest.