China Suply High Quality Copper Brazing Wire

HZ-S105 is a kind of copper and zinc brazing alloy, and available for gaseous flame brazing, high frequency brazing, furnace brazing, resistance welding etc. HZ-S105 has good welding performance, and it is widely used for brazing of copper and copper alloy, steel, copper nickel alloy, gray cast iron, cemented carbide etc. It could replace H62 filler metal and be used as wire of brazing brass. HZ-S105 is a special brass brazing filler metal that contains tin and silicon. While tin improves fluidity, silicon controls evaporation of zinc, and eliminates gas hole to get an excellent welding process. Because of good corrosive and toughness, HZ-S105 is often used by surface welding worn parts of metal, such as bearing valve sealing surface, propeller. HZ-S105 brass wire should work together with copper gas welding flux when oxyacetylene gas brazing.

Item Number:  HZ-S105

Chemical Composition (%): Cu 57-59, Mn 3.7-4.3, Fe 0.15, Zn Remain,

Melting Point:880-909°C

Recommended Temp.:910-960°C

Advantages and Usage: For brazing tungsten carbide tips,copper and copper alloy, steel and cast iron in the method of flame brazing, furnace brazing and induction welding

Caution:

1.The surface of oil and oxide on the work pieces should be cleansed carefully before brazing .

2. Preheat the work piece to 400 to 500°C before brazing.

3. Matching flux should be used together when brazing.            4.Neutral flame or slight oxidizing flame could be used when flame welding. Appropriate decrease welding temperature, increase welding speed, reduce residence time of molten pool in high temperature to lessen the evaporation and oxidation of zinc.