digital readout/measure length 30--3000mm linear optical scale and digital position readout for machine

DC linear scale

DC10Normal linear scale resolution(um):10, 5, 1, 0.5,0.25, 0.1 reading length 30-1000mm

DC10F Slim linear scale    resolution(um): 5,1, 0.5   reading length 30-600mm

DC20 Large-linear scale     resolution(um): 5, 1, 0.5  reading length 1000-3000mm

DC10-K Wild voltage linear scale  power supply: 5-36V   resolution: 5um, 1um, 0.5um

Key Features

Resolution:0.1/0.5/1/5/10um

Accuracy: ±3/±5/±10µm(20°C/68°F)

Bench marks:the grating period:20um optical linear scale

Grating system:transmission infrared optical measuing system.the infrared wavelength is 880nm.

Reading head sliding system:vertical or 45°five precision bearing system

D60 DRO

D60-2V  Full-featured digital readout (milling machine, boring machine, lathe machine, grinding machine)

D60-3V  Full-featured digital readout (milling machine, boring machine, lathe machine, grinding machine, electronic spark machine)

D60-2M/3M  milling machine and boring machine DRO

D60-3E  electronic spark DRO

D501-1V single-axis DRO

D60 Function introduction

1)Circular drilling function: Digital readout can automatically calculate the location of the hole according to the inputted data

2)Linear drilling function: Opposite to the axis of any angle, only the hole spacing remain fixed value, The DRO can calculate the location of the hole according to the inputted data

3)Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved.

4)Determine the workpiece center Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece center

5)200 sets tool base: while repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator

6)Round arc processing: sample round processing and two axis arc processing

7)Function calculator: calculator function can improve operation efficiently

8)Slope calculation: input the two points of workpiece, the DRO can calculate the slope of the workpiece.

9)Z-axis combination calculation: Z-axis can display the combination displacement of two parallel axis

10)Preset value: preset the radius of workpiece

11)Linear scale error compensation or non-linear scale error compensation: compensation to ensure absolute precision and maximum efficiency. Multi-point compensation can reduce the machine error.

12)Numerical filtering function