LT-122SN/132SN HOT SELL! Sweater knitting machine computerized flat knitting machine

LT-122SN/132SN sweater knitting machine

Machine specification:

01.Stitch:7G,8G,9G,10G,12G,13G ,14G ,15G ,16G;

02.Knitting range:48inch(122cm),52inch(132cm);

03.Knitting speed:Control by AC servo motor. 32 segment selection. The highest speed can be achieved 1.2m/s (depending on the needle distance, pitch yarn, flower structure and the other factors);

04.Knitting system:singel nose and system;

05.Knitting function:needle,piontelle,applique,jacquard weave,mingpinconcealed needle and other regular pattern weaving;

06.Shift bar:Control by AC servo motor. 2 inch needle shift range, at the same time, has the precise fine adjustment function.; 07.Needle selection device:special eight section eleromagnet control,front and rear panel full jacquard;

08.Coil density:stepping motor control,32 segment density selection using subdivision technology can accurately control the length of the garment,adjustable range 0-650 degree;

09.Read pin signal:advanced encoder reader;

10.Turning function :triangular compound desigh,can separate the needle,weaving,hanging eyes,not woven,to achieve efficient production;

11.Settling plate:stepping motor control,can be adjusted according to different fabrics,fabric suitable for many kinds of collecting and putting;

12.Probe device:the new probe ensures that the false alarm caused by the ovelapping of the yarn nozzle is avoided in the textile area;

13.Initial device:From the bottom plate and the innvative design of lifting needle reliable;

14.Yarn shearing device:Each group contains a pair of scissors and two clips,the left side of the configuration;

15.Batching system:computer program instruction,stepping motor control,32 segment selection,adjustable range 0-100; 16.Color changing system:the 1*8 set of yam nozzle is arranged on the left and right sides of the 4 guide rails,can be in any position to switch yam mouth bar;

17.Protection system:in the operation of the machine yam broken,knot,floating yam ,rewind,piece end,shift bed does not retum,the striker pin,program error,automatic alarm;

18.Control:(1)Screen uses a 10.4 inch touch screen LCD,Various working parameters can be displayed and the value of the degree of the knitting line,And at any time to adjust the machine running,transmission mode using USB,system extended memory up to 1G; (2)plate making system and control system(software part)to facilitate the upgrade for free comfiguration; (3)multilingual operation version:support chinese,english,turkey,bangladesh,arabia and more than 10 language;

19.Netwoek function:fast ethemet,knitting data can be uploaded,downloaded and shared;

20.Power supply:single phase 220V/three phase 380V,using CMOS Technology,has the memory and the recovery function in the power cut moment,power consurnption 1 KW(the actual power consumption is much lower than label value,depending on the distance and working condition).

Factory Scale:

Spare parts of the machine:

Product can make:

Our sweater machine can make kinds of the type.

And hope the sweater will be ok for you.

Contact way:Mrs Laura

Whatsapp:+86 18766531697