split solar water heater system

CHARACTERISTICS

The upright tank can keep the water temperature at different level.It can heat the top water instantly.The special structure can prevent from mixing the cold and hot water together.

The tank is located in the building ,the connection pipe between the tank and water tap is very short,so that hot water can be used instantly and seldom cold water flows out.

The tank is located in the building,the hot water loses less energy than the normal one.

The heater collector and the water tank is separated,that makes the system combine with the building perfectly,which will not effectthe sightseeing of the building and the environment around.

Back up with electric heater so that in the day without sunshine hot water can also used.

Capacity:100L,150L,200L,260L,300L,400L,500L.

PARAMETER TABLE-1

REMARK

Inner Tank :stainless steel SUS 304-1.2mm/porcelain inner tank

Out Tank:painted steel-0.6mm/stainless steel-0.6mm

Insulation:50mm Polyurethane 

The inner tank material:SUS304-213;SUS316L stainless steel 1.2mm

The out tank :color steel or SUS304 stainless 0.5mm

The heat insulation material:Polyurethane

The thickness of the insulation:47.5-60mm

The use pressure:<6 bar

The test pressure:10 bar

The accessories:

The temperature and pressure relief valve

The sensor

The copper coil heat exchanger:one or two

The drain pipe

The installation method:vertical