Durable hot sell cpap respiratory equipment

What is Respiratory exerciser?

The Respiratory exerciser is used to carry out independent and controlled respiratory exercises for bedridden patients. Superficial and therefore inadequate respiration results in insufficient ventilation of the deeper- lying areas of the lungs. Secretions (in particular mucous) can accumulate in the lower regions of the lungs, making the lung tissue susceptible to infection.

This product is suitable for the patient who has a decline in lung function due to chest lung disease, surgery, anesthesia and mechanical ventilation, do the recovery training of the lung respiratory function.

What is the Respiratory exerciser's performance?

1. It helps the patient to recover normal respiration after a chest or abdominal surgery.
2. It encourages deep and prolonged inspiration.
3. Three chamber design allows the patient to lift the balls without any resistance to achieve the maximum volume in minimum time.
4. Three chamber design helps the patient in monito ring their development.
5. The small-size design proves economical in maintenance and storage costs.
6. It incorporates a container to place the mouthpiece after being washed which has a lower overture to drain the spared cleaning water drops and maintains hygienity.

Patients should exercise several times daily using this breathing therapy device.

Lung capacity will improve and breathing will become easier.

1.Three kinds of standards(600cc/sec,900cc/sec and 1200cc/sec)

2.Size:140mm(L)*73mm(W)*171mm(H)

3.Weight: net weight=144g / gross weight=191g

It consists of plastice shell, three balls, mouthpiece and connection tube.

1. Hold the unit in an upright position.

2. EXHALE-normally and then place your lips tightly around the mouthpiece at the end of the green tubing.(Fig.1)

3. LOW FLOW RATE-Inhale at a rate to raise only the ball in the first chamber.The second chamber ball must remain in place.This position should be held foe three seconds od as long as possible whichever comes first.(Fig.2)

4.HIGH FLOW RATE- Inhale at a rate to raise the first and second chamber balls.Ensure that the third chamber ball remains in the rest position for the duration of this exercise.(Fig.3)

5. EXHALE-Take out the mouthpiece and exhale normally (Fig.4) RELAX (Repeat)-Following each prolonged deep breath,take a moment to rest and breathe normally.This exercise can be repeated according to physician's instructions.

Calculate your inspirate volume,multiply your inspiratory time(in second)by the inspiratory folw setting(in cc/second).

For example:
If you inspire a slow,deep breath at a folw setting of 200cc/second for 5seconds:
inspiratory time "flow setting= inspiratory volume 5sec" 200cc/sec=1000cc or 1liter