T-120B Triple Output 5V 12V -12V ac to dc Switching Power Supply SMPS

120W Triple Output Switching Power Supply T-120 series

T-120B Triple Output 5V 12V -12V ac to dc Switching Power Supply SMPS 
Features:
Low price and high reliability
105℃output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With Short-circuit and overload protection
Compact size, light weight
100% full-load burning test
Installed with EMI filter, minimum wave
SPECIFICATIONS
OUTPUT
Model T-120A T-120B T-120C T-120D
Output number CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
DC Voltage 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V
Rated Current 11A 5A 1A 11A 4.5A 1A 12A 5A 1A 12A 5A 2A
Current Range 2-11A 0.5-5A 0.2-1A 2-11A 0.5-4.5A 0.2-1A 2-12A 0.5-5A 0.2-1A 12A 0.5-5A 0.2-2A
Rated Power 120W 121W 118W 118W
Ripple & Noise 80mVp-p 120mVp-p 80mVp-p 80mVp-p 120mVp-p 120mVp-p 80mVp-p 150mVp-p 150mVp-p 80mVp-p 120mVp-p 180mVp-p
Voltage Adj. Range CH1;+10,-5% CH1:+10,-5% CH1:+10,-5% CH2:+10,-5%
Voltage Tolerance ±2% ±5% ±5% ±2% ±5% ±5% ±2% ±5% ±5% ±2% ±6% ±6%
Inlet Stability ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±1%
Load Stability ±2% ±6% ±6% ±2% ±6% ±6% ±2% ±6% ±6% ±2% ±6% ±6%
Setup, Rise, Hold Up Time 200ms,50ms,20ms at full load

INPUT
Voltage Range 85~132VAC/176~264VAC selected by switch 47~63Hz; 240~370VDC
AC Current 2.5A/115V 1.25A/230A
Efficiency 77% 77% 76% 80%
Inrush Current Cold start 30A/115V 60A/230V
Leakage Current <3.5mA/240VAC

PROTECTION
Over Load 105%~150%
Protection type: Fold back: current limiting; reset: auto recovery

ENVIRONMENT
Working Temp., Humidity -10℃~+60℃(Refer to output derating curve), 20%~90%RH
Storage Temp., Humidity -20℃~+85℃,10%~95%RH
Temp. Coefficient ±0.03%/℃(0-50℃) ON+5V
Vibration 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes

SAFETY
Withstand Voltage I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC

STANDARD
Safety Standard Meet UL 1012 requirement(Not apply for the mark)
EMC Standard …………

OTHERS
Dimension 199*110*50mm(L*W*H)
Weight 0.9Kg

NOTE
1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity.
2.Error.include the setting error,line stability and load stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%.
6.Total output canbe maximum Current,total load can not exceed the maximum output power