Hot Sale Wireless Rolling Door Shutter Magnetic Contact Metal Switch

CA-55W  wireless rolling door (shutter) Magnetic Contact  metal switch CA-55W 

Specification:

1.Triggered distance between two parts:<6cm

2.Working voltage:12V DC, with dry battery model:23A . Low battery voltage about 8V.

3.Working current:≤10mA Static current:≤5Μa Power: standby :0.01W, Alarm :0.09W

4.Chip: IC :EV1527

5.Working frequency:433.92 MHZ or 315 MHZ

6.Transmitting distance:noninterference ≥200m ; indoor about 30~50 m

7.Emitting frequency:>10mw Frequency tolerance:±0.2MHz

8.Oscillator resistor:330k (or 430k)

9.Operating temperature: indoor -10 ~ 50C, related humidity ≤ 95%

10.Size: Transmitter part: 90 mm(L)×55 mm(W)×22 mm(H);

              Metal magnetic part (Zinc alloy surface): 60mm(L)×15mm(L)×13mm(H) .

11.Weight: 0.2kg(with battery)

Description:

Modern micro chip adopted which makes it alarm on time, high accuracy and reliability,

flexible volume and easy installation. Ready to be worked by your alarm system.It features power saved, low battery warning, non-false alarm. Widely used for rolling door, shutter door, garage door.

Installation:

Ready to work with the alarm control panel.Depends on how to log in the sensor.

Metalized magnetic part: install in the motion door and keep it parallel with the side of the base.

Metalized reed pipe: It should be installed on the floor by screws, and keep it at the same level and parallel with the metalized magnetic part, the distance between two parts no more than 2cm.

Wireless emitting sensor: There is a wire connected with the metalized reed pipe, and must keep within the receiving area, the signal wire should be installed along the floor. For example, if you are on the 8th floor, but your garage is on the first floor. You can install the wireless emitting sensor in your home, and extend the wire into the garage.

Test it: put two metalized parts close and than open it. If the signal LED flashes, it means normal work.

Open the cover of transmitter, fix battery and cover it. After installation, open the door, the signal LED flashes about one second, it means installing completed

Stick sticker paper on the rear of transmitter and stick it on the wall, even pin it up by screw.

if Green low battery LED lighting means battery is low power. Please replace the same size battery.

Product photos

  wireless rolling door (shutter)  CA-55W

Book door magnetic total atlas

Packaging  Details:    Standard packing

Delivery Detail:           Samples:3-5days;  bulk orders:10-15days

Shipping way:
Sea:              Weight or CBM above on 100KGS, port to port service.
Air:                Weight or CBM above on 45KGS, port to port service.
Express:       DHL, TNT, UPS, Fedex, EMS, China air post for any weight. Door to door service.

1.Warranty for two years if the damage is not caused by human.

2.We can reimburse the related defect parts if you provide the convincing evidence.

1. Door Overview

Wireless door sensor is a kind of security monitoring, security systems, a very popular device, wireless door sensor work very reliable, compact, especially the work by wireless means, makes installation and use very convenient and flexible. Wireless door sensors are used to monitor the door switch status, when the door is opened for any reason, wireless door sensor immediately transmit specific radio waves, remote alarm to the host. That is when someone illegally open or forced open the door, signaled alarm ... with our continuous efforts to create unlimited business opportunities that you immediately!

2. Installation

After installed batteries, wireless door components are mounted on the door frame or window frame to be monitored, the wireless door magnetic strip mounted on the door or window to be monitored, the spacing of these two components as close as possible. (Magnetic components is best to use screws. Screw holes in the rear panel, the required hard sharp object poke open)

3. Using

After installing the best antenna all the way out, and then open the windows and doors are monitored, the Magnetic Red "work instructions" light, while the host and the handset will sound an alarm and instructions, such as the red light does not shine on the door sensor or host and the handset does not alarm check green "low voltage directive" lamp is lit, such as light, replace the battery, or contact your supplier. 

       Shenzhen Chuangan Electronics Co., Ltd.   was founded in 2008, Shenzhen is a professional burglar alarm equipment R & D processing and sale of high-tech private enterprises, mainly engaged in door magnetic detectors, emergency button, infrared detectors, smoke detectors, Gas detector, Siren, horn and other security products.

Why choose us?

1)  We are professional manufacturer in this field with lots of years R&D and market research experience, we can provide competitive price and high quality products for you. 

2)  7 years manufacturing door access system,and we have big factory and good worker,best technology.we can provide durable product.

3)  We are produce most all the alarm in the market.

4)  Strict quality control. We test every single product before shipment.

5)  All products are sending from Factory,so the price is the lowest. other supplier are getting from our Factory or from poor factory.

  *   Welded with leads

Welding  is a key working procedure, easy virtual welding at low temperature,leading to the switch is not stable, welding at high temperature easily cause switches damaged. So, we weld the switches with the welding machine.

  *  Green Packaging Process

Magnetic contact switch exports US and EU must be environmental protection,not only the material and process requirements, ABS shell sealling processing is the key.

  *  Standard Testing

Without a comprehensive inspection, qualified products, there is no guarantee! Incoming inspection, process inspection, finished product inspection is the basis of qualified products inspection requirements.  Gap, contact resistance, life test and electrical parameters in accordance with the standard testing. All test one by one before shipping, 100% QC PASSED.

Certifications & Exhibition shows   

1. How can I place an order?

You can contact any of our sales person for an order. Please provide the details of your requirements as clear as possible.  

For customization or further discussion, it is better to contact us with trade manager of alibaba, MSN messenger, Skype, or other instant ways.  

2. When can I get the price?

Usually within working time after we get your inquiry.  

3. How can I get a sample to check your quality?

After price and function confirmation, you can require for samples to test the quality.

4. How long can I expect to get the samples?

After you pay the sample charge and send us confirmed files, the samples will be ready in 1-3 days.

The samples will be sent to you via express and arrive in 3-5 days. 

5. What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order. Generally within 7 days for about 1000pcs.

6. What is your term of delivery?

 We accept EXW, FOB, CNF, DDU, DDP, etc.

7. Could I put our own logo on the product?

Yes, it is customized order. 

Thank you for your attention short notice. If you have any question, pls feel free

 to contact us!

TEL:            (086)0755-27712202

FAX:           (086)0755-27716751

Skype:         jingxiaohua028

QQ:            2850991627

Phone / WhatsApp/ wechat:     18007553035

Website:     

Website on :        http://szchuangan.en.