Polular automatically transfer and wide encoated wireless signal repeater

Specifications

Polular automatically transfer and wide encoated  wireless signal repeater  

  Main features    

1.    If the distance get too long between the alarm host and sensors, it will results in wireless signals didn’t be transferred well,

you can use this wireless repeater to solve this problem.

2.    You just need to install this wireless repeater in the suitable place between alarm host and sensors, and just make the

antenna out, then connect the power.

3.    If the distance between the alarm host and sensors get too long, you can put this wireless repeater in each long distance

place.

4.    If the wireless repeater didn’t get signals, LED light won’t be on, and it will be on for 2 seconds if get signal successfully.

5.    Normally, the distance for wireless repeater to gettransfer signals is 20 to 30 meters, so, the signals can be transferred

from sensors to alarm host successfully if within this distance.

  Shenzhen Golden Security Technology Co.Ltd was established in 2005, is a professionalmanufacturer in terms

of researching& developing, manufacturing, and, marketing securityproducts, and located in the coast of

South China, Shenzhen.

   "To manufacture quality products, to provide good service, to assist clients get profit" is our coreculture. Our products

line includes: GSM alarm system, PSTN auto dial alarm system, 3Gcamera alarm system, all kinds of alarm

accessories including intelligent PIR motionsensor, window sensor, smoke sensor, gas leakage sensor,

shock sensor, glassbreak sensor, standalone smoke detector, etc.

   By combining consummate technical, skillful know-how, and satisfied after-sales service, matchingquality products

with reasonable price, we have explored extensive saleschannels, acquiring good reputation and

popularity.

     All of our security products are CE, FCC, ROHS certificated.

Notes:

1.    You can’t put two or more wireless repeater in the stated distance (As above point #5), or else, it will result in host panel

can’t get signals successfully because of frequency interference.

2.    When wireless repeater get signals successfully from sensors, it will help to transfer signals to alarm host after 2 seconds,

so,  the more wireless repeater you used, the more time it will be took for the signals transfer from sensors to alarm host.