Contact Adhesive

Specifications

HEXIN contact adhesive  is used in the field of decorating rooms,the inside of cars and advertisement art,etc.It can be used for sticking to veneer aluminium-plastic sheet,fire proofing sheets and other wooden things.It can also be applied to sticking some other materials like steel aluminiu,rubber,plastic, leather carton and woven cloth,etc.Not suitable for the sticking of such materials as the polyethylene,polypro- pylene,polytetrafluoroethylene(PTEE),organic silicon, snowflake iron and plastics,rubber and leather containing a large number of plasticizers,etc. 

 Instructions:

1.Clean the surface of the material,make sure there is no dust or oil on them,then rough and dry it.

2.Paint the surface from center to brim with a cut piece (If they are large pieces,it is better to paint the two at the same time),airing them 5 to 15 minutes under the condition of room temperature 23±2℃,humidity<70% (Until the glue film feels less adhesive).

3.Put the two surfaces together at the right position, then press them from center to brim(to push the air out),knock at it with a rubber or wood hammer to make it strong.The bonded material can be used after 24 hours,and it can achieve the best effect after 5 days.