YOUYUE948H Separator separating machine to replace LCD touch panel digitizer glass, touch screen replacement for phones

Features:

1. Auto heating metal plate, maximum temperature is 400 centigrade

2. Safety power system inside, avoiding the electric leakage problem

3. Anti static body material, prevent the LCD and the flex cable being damaged from the static

4. Easy installation

5. 4 stronger arms to press the touch screen glass on the plate

6. Smooth metal plate to hold the touch screen without any damaged

7. Temperature should be set to 80 centigrade to 100 centigrade, when you do the job on iPhone and galaxy series and ipad

8. 2 bearings to last long the life of the wire you use to separate, and prevent your hands be hurt by the high temperature platform

9. Compatible for LCD or LED screen assembly

10. US/UK/AU/EU Plug Supported

How to use it:

Step 1: Put your LCD with touch screen on the metal plate, LCD side above

Step 2: Set the 4 arms to keep the touch screen on the metal plate stably

Step 3: Turn on the machine and wait for the metal plate become 80-100 degree (Attention: we advise the temperature is 90 degree, because the screen separator will damage your LCD screen if it is too high)

Step 4: Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged

Step 5: Finally you will find yourself do a good job; now start to get a well pay business.

Packing:

1x LCD Touch Screen Separator 220V or 110V

1 x Cutting Line 50m

1 x Pair of Rods