Electrolytic Plating machine zinc plating machine 6000A

Weight without bath liquids                           : approx. 8,000 kg

Weight with bath liquids                                 : approx. 12,000 kg

Number of wires                                               : one

Wire speed                                                         : max. 15m/s (combined with wire drawing machine or bobbin move motorised pay-off, if with coiler basket, the Max. speed is 5 m/s)

Wire material                                                      : Cu

Wire diameter range                                          : 1.2 – 2.6 mm hard  1.2 – 3.0 mm soft

Condition of wire                                                 : low grease and free from oxides

Coating material                                                 : Sn

Coating thickness                                               : 1 to 25 µm

Coating quality                                                    : as per DIN 40500, ASTM B 33

Total installed load                                              : approx. 120 kW

Mains voltage                                                      : 3 x 380V / 50 Hz

Control voltage                                                   : 24 V DC, 230 V AC

Electric equipment                                             : acc. to VDE and VBG 4

Max. ambient temperature                                 : 45°C (hall temperature)

Plating current                                                       : 6000 A, 10 V

Degreasing current                                              :  500 A, 10 V

Immersion length, plating                                   :  140 m

Immersion length, degreasing                          :  40 m

Groove dia. of current roller, plating                :  400 mm, 27 grooves

Groove dia. of current roller, degreasing       :  400 mm, 18 grooves