Tire Steel Removing Machine to Pull the Steel Ring From Tire Bead

Product Application

This machine is used to pull the steel ring from tire bead for next step . It is same with the tire bead remover machine

Main Features

1.this machine consists of motor , hydraulic system , extracting hook , extracting mouth ,main machine frame , etc 

2.Motor drives the hydraulic system and oil cylinder , the hook is welded on the draw bar of cylinder

3.The reciprocating movement of oil pump and oil cylinder will cause the hook reciprocation

4.put the tire onto the hook mouth , extend the hook out of mouth and hook onto the type lip , then start the motor

5.Owing to the strong extracting force of the oil cylinder , the wire cable will be taken out as a whole ring 

Following is our working process of waste tire recycling machine 

Tire cutter machine .

This machine is used to cut the whole tires  into large pieces 

Tire shredder machine 

This machine can shred the whole tire into about 50*50mm 

Tire rubber crusher machine 

It is used to crush the rubber granules into 10-30 mesh rubber powder . Meanwhile it can separate the steel , fiber from rubber powder 

fiber separator .

it can fully separate the fiber from rubber powder 

rubber grinder .

it is used to grind the powder from 30-120 mesh