CXGF water filling machine, 3-in-1 automatic filling machine, filling plant

Specifications

1 CXGF water filling machine
2 3-in-1 automatic filling machine
3 filling plant
4 304 stainless steel
5 beverage machine  

The machine is mainly used in the beverage filling machine. The three functions of bottle wash, fill and seal are composed in one body of the machine. The whole process is automatic. The machine is used in filled juices, mineral water and purified water in bottles made of polyester and plastics. The machine can also be used in hot filling if being installed with temperature controlling device. The handle of the machien can be freely and conveniently turned to adjust the machine to fill various types of bottles. The filling operation is faster and more stable because the micro pressure filling operation of the new type is adopted. There the output and benefit of the machien is higher than the machines of the same specifications. The advanced programmed controller is adopted to control the machine to run automatically while the using wind is used in the bottle-entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle bottle forward steadily and reliably. It is conveniently to operate with higher automation because every part of the machine is inspected to run with photo electricity. On the bases, the filling parts of the machine can be changed into filling methods of lower vacumm. The machine is an idea-preferred equipment for beverage makers.

Application:

3-in-1Set Full Automatic Pure/Mineral Water Filling Machine

1. Rinser

Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.

Rinsing machine adopts Sunswell original overturn and double-opened bottle clip. Bottle clip lock the bottleneck, the material of bottle clip is SUS304, which is hygienic and durable.

Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° angle ensures to wash all side of the bottle, and can save the water.

Made of stainless steel of superior quality.

Equipped with bottle jam protection device.

2. Filler

 The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ±2mm (subject to bottle design). The filling valve material is SUS304. The filling system has liquid level automatic control. Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill. Bottle is conveying by the wheel in the filling part.

3. Capper

 Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. our screw capping has following feature

Washing part

 Filling part

 Sealing part