3mm to 6mm Bronze Mirror Glass Sheet

Bronze Mirror Glass  

Mirror is produced by the float process with the addition of small quantities 

of metal oxides to color the normal clear glass mix. This coloration is achieved through

adding metal oxides at the smelting stage. Addition of color does not affect the basic

properties of the glass, even though visible light reflectance will be slightly higher than

clear glass. Float glass continues to be the leading choice for high end architectural,

automotive, and specialty glass applications. 

Bronze Mirror Glass Sheet Features:

1) High visible light transmitting rate, low reflecting rate, low radiating rate (e < 0.1).
2) Avoid the light pollution and build good ecological environment.
3) Control solar energy radiation effectively, block far infrared radiation, save expenses of air conditioners in summer, save heating expenses in winter, have good effect of heat preservation and energy saving.

4) Can be cut, bent, tempered, heat strengthened and laminated without affecting the coating

5) The surface of flat glass is as flat and smooth as polished glass.  Zebra angle: <45 degree. The uniformity of thickness is superior, and the minimum thickness deviation can be controlled within 0.1mm.

6) If you need tempering the glass sheet, we can also do it.

Specification

Application:

1. External use of windows, doors, shop fronts in offices, houses, shops, etc
2. Interior glass screens, partitions, balustrades, etc
3. Shop display windows, showcases, display shelves, etc
4. Furniture, table-tops, picture frames, etc

Packing:

Seaworthy and fumigated wooden cases/end-caps with powder or paper interlayer.

ISO Certificate: