Smartphone Control GPS GSM Car Alarm with Engine Start Module VT-368 Plus

The characteristics of the Victor Smartphone Start include many key functions as below:

A. GPS Location. You can easily track the location of your car anytime. Feedback with text message or multimedia message. No need extra map platform for this services. No need to extra cost for the platform. Only if your mobile with GPRS. You can easily check the location with multimedia message, the feedback with location of your car and the map, convenient and economical. Smartphone Start System with backup battery. If the smartphone start is power off, the system will feedback you by message and telephone call to report this emergency with the location.
B. GSM Network. Through GSM network, you can easily to operate and manage the alarm system by sending message or phone call. When your car was damaged or stealing, smartphone start will report this alarm by sending message and make phone call. This is much better than the normal car alarm which the control distance limited and can not report the alarm to the car owners. It makes you control the car anywhere, anytime.
C. Humanization Design. The system equipped with transmitters. You can control the system by mobile also by remote transmitters, you can control the system by mobile also by remote transmitters, you can cancel the remote transmitter if your remote transmitters was lost or stolen, to disable the remote transmitters.
D. Push Start. GPS car alarm system have push start enables you enjoy a convenient life with keyless engine start, and also with remote engine start. Low temperature detection, timer engine start.
E. The installation is same as normal one way car alarm, there is not allowed to perate durning driving, the system will feedback with message"the car is driving, operation negative", if there was no any operation after 30's when you call the smartphone start system, the smartphone start will hang off the calling and inform the car owner with message.
F. Dial CPU technology make sure that the system to operate mutiltask rapidly, 85% of the electronic spare parts are imported, to make sure the quanlity and lifetime, please feel free to use.

Item Specifics

• Property:Alarm Systems and Security;
• Place of Origin: Guang Dong, China (Mainland);
• Brand Name:Victor;
• Model Name:VT-368Plus;
• Special Features: Smartphone Start / GPS GSM / Universal Push Button;
• Material Type: 85% Electronic Components are imported;
• Applicable car models: Universal;
• GPS Antenna: High Sensitive GPS Receiver -169dbm;
• GSM Antenna: High Sensitive -106.1------107.3TIS;
• Networks: GSM/GPS;
• GSM Frequency: 850/900/1800/1900MHz;
• Transmitter Frequency: 433MHz;
• Resting Current: 20mA;
• Built-in-Li-lion Battery: 3.7V 650mA;
• Dimensions: 136*88*32 (mm);
• Weight: 250 (g);
• Working Temperature: -30°C +80°C;
• Operate Means: Sending Messages or Phone Calls.

Attention

Installer mush know very well about the diagrams of the car, it can be only installed by experienced and specialized technicians to install as the installation well or not will directly effects its working;
A. Please do not plug in or out the SIM card when power connected, to avoiding damage the card ( Please cut off the power and take out build-in battery when plug in or out the SIM card;
B. The system should installed a secluded place to avoid discharged illegally, and also should be installed at a place no water to avoid damaged by water;
C. The system should be face to up, placed horizontally, gradient should not over 45 degree;
D. Please do not install the system near to the engine, to avoid working improperly and shorten working life;
E. Please pack the wires well and make sure insulation with the car to avoid accident caused by short circuit;
F. After the system connected with power first time, the telephone number of the first phone call to the main unit is the master telephone NO, just directly input the 2 command code to operate the Smartphone start system, other telephone NO must input the operation code +2 command code( the operate code is 123456 for factory setting, it must be changed, no need to input, before operate please read the command code table.);
G. Clear the master telephone NO, open the door after disarmed, foot on bark, turn the key from OFF to ON 3 times, and put the Key at ON position at the third time, the siren will sound 1 time, then turn off ACC, release the foot bark and close the door. The system will clear the command telephone NO. If you want to set it again, please dial the SIM card NO in the main unit, after connected the new NO will be the command telephone NO.