High Recovery rate flotation machine for processing mineral

Centrifugal concentrator in stock

Ball mill in stock

Diaphragm Jig in stock

Descriptions of flotation machine

It uses in classifying in non-ferrous and ferrous metal mineral. SF machine is the mechanical agitation type, and it can own draw It can own draw the inspiration and the pulp; Compared to A, its spirit is big , and the power loss low, and the impeller lap wears lightly; JIF has the self-absorption ability, the suction intensity big, and it may adjust the air input in 0.1---1m3/m2min; the impeller diameter is small, the rotational speed low, consuming electricity few, also advantageous for the automatic control. 

Impeller of model SF flotation machine is composed of the dosed double section cones and ot can produce strong smutty cycle doumward.Its features are as follows:
 (1)The capacity of air suction is large, the power consumption is low.
 (2)Every tend has three functions of air suction, slurry suction and flotation simultaneously  being unique in flotation return circuit without need for any supplement and equipment, the circuit change is convenient for horizontal location.
 (3)The slurry cycle is rational, the settlement of coarse sand can be reduced into full play.
 (4)The regulation is convenient to equip auto and electro-controlling arrangements for slutty level.

XJK-A series flotation machine is suitable for the flotation process, the ferrous metal mineral, also available in non-metallic mineral classification; it is suitable specially for the ore ,which is contaminated of fine grain, and ingredient complex, as the mineral separation process is able to obtain the good separation effect.

The merit : The air input and the productivity are big; its structure is simple, thus the service is convenient; the impeller and the lap are composed of the wear-resisting rubber, which may carry on the design according to the

user.