EN10305-1 25CrMo4 honed tube

1. Commodity: EN10305-1 25CrMo4 honed tube

2. Manufacture method: cold drawn, cold rolled

3. Internal surface treatment method: honing.

4. Size range: 40mm*30mm - 480mm*450mm

5. Standard&material: EN 10305-1 E355,C45E,25CrMo4,34CrMo4,42CrMo4,DIN 2391-2 ST52,ST52.3,ST52.4, ASTM A519 SAE1020,SAE1045,SAE1026,SAE4130,SAE4140,etc.

6. Delivery condition: BK, BKW, BK+S, GBK, NBK.

7. OD tolerance: as per DIN2391-1, EN10305-1, ASTM A519 or as per customer's requirement.

8. ID tolerance: H7,H8,H9,H10, or given by customer.

9. Wall Thickness tolerance (eccentricity): +/-5%

10. Roughness of internal surface(Ra): 0.4um max.

11. Ovality of OD: 0.15mm max for tubes with OD below 150mm, 0.25mm max for tubes with OD above 150mm.

12. Straightness: 0.5mm/1000mm max for tubes below 3000mm, 0.8mm/1000mm max for tubes between 3000mm and 6000mm, 1.2mm/1000mm for tubes above 6000mm.

Classification of ID tolerance for honed tubes:

Tubes will be packed in bundles tied with steel strips, internal and external oil coating for anti rust protection, end plastic caps will be added to both ends.

Shipment: by containers.

Based on the manufacturing facilities, the following services are available:

1. Honing,

2. Skiving&roller burnishing

3. Deep hole drilling

4. Grinding

5. polishing

6. Machining

7. Threading

We manufacture honed tubes from 40mm*30mm to 480mm*450mm with length upto 7000mm. External surface can be machined or polished as per customer's requirement.

We are ISO9001-2008 certified manufacturer of hydraulic cold drawn seamless tubes ready to hone,honed tubes,and skived&roller burnished tubes,cylinder barrels,and hollow piston rods.

Payment method:30% deposit,balance before shipment or against copy of B/L or L/C at sight.

MOQ: 4 tons for each size.

Warranty: 1 year after shipment of tubes.

Third party inspection or customer's inspection is acceptable.

Addtional tests or inspections like hardness test,grain size test,metallical phase test,ultrasonic test is acceptable.

Trade term: FOB,CFR,CIF,DAP.