ETCR068AD Clamp AC/DC current Sensor

Function

Measurement of AC current, phase, power energy, power, power factor

Power supply

Zn-Mn dry battery 6F22 9VDC(external power is allowed)

Rated current

15mA

Test mode

Clamp CT, noncontact measurement

Clamp Size

Φ68mm

Range

DC 0.0A~2000A; AC 0.0A~1000A

Resolution

0.1A AC/DC

Signal output

1mV/1A

Accuracy

±2.0%FS(50Hz/60Hz; 23°C±2°C, below 70%RH, keep the wire be in the center of clamp)

Phase Error

≤3°(AC50Hz/60Hz; 23°C±2°C)

Zero clearing

Press ZERO key can clear the data, eliminate the effect of geomagnetic field to the measure of AC current

Output connection

Standard connection: Red wire-positive output; Yellow wire-negative output.

Output Wire Length

2m

Measured Wire Position

Approximately in the geometric center of theclamp, the errors for deviating the center of the clamp increase 1.5%rdg.

Frequency

AC 45Hz~400Hz

Voltage of circuit

Circuit with the voltage below AC 600V

Voltage of battery

When the voltage of battery is below 7.2V, the LED will be lighted when the voltage is low, indicate to replace the battery.

Dimension

224mm×115mm×43mm

Weight

515g

Working Environment

-15°C~45°C;80%rh below

Storage Environment

-10°C~60°C;70%rh below

Insulation Strength

AC 3700V/rms. (between core and shell)

Safety Rules

IEC1010-1, IEC1010-2-032, Pollution degree 2, CATⅢ(600V)

Accessory

Sensor:1pc; battery(6F22 9V):1pc