high temperature screw ground source heat pump(55RT-800RT)

Specifications

high temperature screw ground source heat pump(55RT-800RT)

High Temperature Type(LTLHG(R)-):

Cooling capacity: 185-2800kw (15.9×10⁴kCal/h~240.8×10⁴kCal/h OR 632,000Btu/h~9,600,000 Btu/h)

EER up to 5.1

Heating capacity: 198-2824kw (17.0×10⁴kCal/h~243.0×10⁴kCal/h OR 675,600Btu/h~9,636,000 Btu/h)

Competitive Advantages

1. Wide range of application:

radiant floor, radiator, fan coil units and other refrigeration, heating and sanitary system to take clean water.

2. Green:

The pollution-free environment-friendly refrigerant, run-time without waste discharge, heating can replace the boiler room, there is no combustion process, to avoid the smoke pollution, eliminating the need for cooling when the cooling tower, to avoid cooling noise and pollution tower mold, so that more fresh and beautiful environment.

3. Stable and reliable operation:

Equipped with advanced protection units in various working condition. Piping used in all gas welding process, welding caused the elimination of oxides and impurities to improve unit cleanliness.

Notes:

1. Unit cooling capacity and compressor power consumption calibration conditions:

  Chilled water inlet temperature 12°C, outlet water temperature 7°C

  Cooling water inlet temperature 18°C, outlet water temperature is 29°C.

2. Unit heating capacity and compressor power consumption calibration conditions:

  Hot water input temperature 55°C,outlet water temperature is 60°C,the max up to 65°C

  Cooling water inlet temperature 15°C, outlet water temperature 7°C.

3. When the cooling water temperature range is different from the calibrate mode, press the design performance curves to select their unit refrigeration / heat and power consumption;

4. Heat recovery can be added with requirements.

FINISHED PRODUCTS: