200CFM Chilled Water Fan Coil, Horizontal Concealed Fan Coil Unit(Terminal Equipment)

Specifications

200CFM Chilled Water Fan Coil, Horizontal Concealed Fan Coil Unit(Terminal Equipment)

The FP series water chilled fan coil units are designed specially to meet the varied requirements of zone cooling or heating using chilled water or hot water. Fan coil can be applied to two or four pipe systems to satisfy the requirements of a wide variety of air conditioning or heating application. The FP series is available in concealed and exposed versions for ceiling and floor installation. This unit is presented as a single block including: fan deck, cooling and/or cooling coil, removable filter, drip tray, electrical connection box and decorative cabinet (excluded for concealed version).

FEATURES

INSIDE UNIT

Panels and frame are made of galvanized steel, properly punched and punched for fixing both accessories and the unit itself, either to wall (vertical version) or ceiling (horizontal version).

HEATING COIL

The coils are made of seamless tubes expanded into aluminum fins in continuous block. The connections have brass headers with female fittings and provided with easily accessible vent and drainage valve.

FAN DECK

The fan decks are composed of double suction centrifugal fans with aluminum impellers and 3-speed fan motors. Each fan motor assembly is dynamically balanced.

FILTER

The easily removable filter is made of filtering honeycomb polypropylene fabric and supported by an aluminum or plastic frame.

DRIP TRAY

The drip trays are made from sheet metal treated with polyester powder coating to ensure total resistance to atmospheric agents. The “L” type tray makes the units suitable for both vertical and horizontal installation.

ELECTRICAL CONNECTION BOX

All electric wires are connected to enclosed electrical terminal block, situated on the opposite side to the water connections.

DECORATIVE CABINET

The decorative cabinet has a modern design that blends in with any environment. It’s made from galvanized steel treated with polyester powder coating to ensure total resistance to rust, corrosion, chemical agents, aliphatic solvents and alcohols.

The discharge grille and supporting legs are made of ABS materials.

ON-BOARD THERMOSTART

Mechanical type for two pipe system exposed version use, working mode selection (OFF-Heating-Cooling), ventilation (HIGH-MED-LOW) and room temperature setting.

OPTIONAL

1. Condensation tray (water connection area)

2. Different type thermostats with more advanced functions

3. High external static pressure 30Pa and 50Pa 

 TECHNICAL DATA

1.Cooling behavior:D.B./W.B.Temp.:27°C/19.5°C,Inlet/Outlet water Temp:7°C/12°C

2.Heating behavior:D.B.Temp:21°C, Inlet water Temp:60°C
3.Water resistance is the resistance time rate of high flow
4.Input power is to refer to the input power time rate of high air flow.

5.The data “342/108”,Preceding data is threee rows cooling coil's parameters, Back data is one row heating coil's Parameters.

PRODUNTS IN THE FACTORY

COMPANY AND FACTORY

1. National High-tech Enterprise, Abundant FinancialResources

    Registered capital USD5,000,000, and as a new energy industry, we got financial support from government of

    Shandong province. And we specializing in producing HVAC products (Heating, Ventilation and Air Conditioning) ,

    including central air conditioning system, Air Handling Unit, Water Source HEAT PUMP, Ground Source HEAT PUMP,

    and Refrigerant Equipments, including Air Cooled CHILLER, Water Cooled CHILLER,etc.

2. Two Production Bases, Guarantee Supply Ability.

     Covering an area of 110,000 CBM workshop, annual production of heat pumps are 30,000 UNITS, chillers are

     20,000 UNITS, andrefrigerant equipmentsare 50,000sets, fan coil 500,000 PCS. 

3. Strong R&D Research Team

     Built an Academician workstation, consisted of domestic famous professors and doctors, and high tech workman,

     which can design projects according to customer’s requirement., And built long term cooperation relationship with

     famous universities, such as Shandong university, Xi’an Jiaotong university, Qingdao ocean university. 

4. Famous Brand Enjoyed High Reputation overseas

     We are one of ten leading brands, product exported to Russia, Kazakhstan,

     Ukraine, United States, Britain, Germany, Italy, and so on. And every year many overseas client come for a visit.

5. Perfect Quality Control System

    Invested USD1,700,000 to build the enthalpydifference laboratory, imported advanced inspection equipments from

    America, covering 100% testing item of AHRI, and with a perfect quality control system, from raw material purchase to

    production and quality inspection, to ensure the high quality product can reach the international standards.

6. Qualified Export Certificate: CE certificate, and CRAA, ISO9001.

Every Year Attending Canton and Other Exhibitions