800kg/h reliable quality straw pellet mill line

Specifications

800kg/h reliable quality straw pellet mill line

Usage of straw pellet made by straw pellet mill line

Animal feed pellets made by our animal feed pellet press making machine  is widely used in heating, life stoves, hot water boilers, industrial boilers, biomass power plants, etc.

Materials of straw pellet mill line

Main raw material for feed pellet of straw pellet mill line are corn stalks, rice stick, rice husks, peanut shells, shell seeds and all other residues,.

After crushing, mixing, pressing, drying and other processes, the materials are made into final pellets.

Brief introduction of straw pellet mill line

1.Capacity:0.5-2t/h

2.Crushing(hammering)---Drying---pelleting---cooling---packing

3.We can make the perfect design according to your workshop and your different raw material with

4.the economical capital investment

5.We accept OEM for the straw pellet mill line

6.Stable and Durable Equipment Function

Process of straw pellet mill line

1.Raw materials preparation of straw pellet mill line

In order to improve the efficienty and get the good effect of the pellet made by our straw pellet machine,the raw materials should be clean,no big impurity,easy to transport and put into the hopper of the crushing machine(or pulverizer)

2.Crushing process of straw pellet mill line

Before pelleting by straw pellet machine,depending on the different input material, we choose the suitable Crushing machines. If the raw material is the Straw, we use Straw Mill. When material is wood and the thickness of raw wood material is >10mm, and >50 * 50mm(L * W), we need use the Wood Chipper to chip them into small pieces, then crush the small pieces into wood powder with diameter less 5mm by Hammer Mill (Crusher).After crushing,the materials legth and width should be less than 5mm.

3.Drying process of straw pellet mill line

The best moisture content for straw pellet machine is 13-18%,we have rotary dryer and air flow dryer for different capacity for your reference.The air flow dryer is usually suitable for the capacity less than 1.5t/h.The rotary dryer is usually suitable for the capacity more than 1.5t/h.Of course,the dryers’ capacity also is according to the materials.We would like to make the suitable dryer to match the whole straw pellet mill line.

4.Pelletizing process of straw pellet mill line

Straw Pellet Machine is the most important equipment of straw pellet mill line, which have the following features:

(1) The lubrication system for straw pellet machine, lubricate the bearings and rollers, which completely solved the trouble of lubricating rollers and bearings depending on the operation experience.And extend the working time of rollers,dies and bearings.

(2) Driving Gear adopts the high precision gear transmission structure.

(3) As per the die and roller of the straw pellet machine, we have the fine machining with the alloyed steel, such as 20 CrMnTi and 40Cr; and stainless steel, such as 4 Cr13 and 3 Cr13.Selects high quality bearing, ensure that transmission efficient, stable and reliable.

(4)Pellet size can be adjusted:

Replacement of mold can produce different shape and size of products,usually shape as round, square, particle shape.

(5)High effiency:

Small motor power, high output.Adopt new granulation compression concept design, maximum limit reduces power loss and Tons of energy consumption on average compared to other similar equipments to reduce energy consumption of 20 ~ 30 kw, energy saving up to 30%, more powerful, the durability is higher, more energy conservation and environmental protection

(6) Automatic constant temperature:

this machine adopts the technique of automatic constant temperature, outdoor temperature at minus 20 degrees and 40 degrees centigrade all can processing molding, and ensure the compression section constant in the set temperature automatically, effectively guarantee the mould and the bearing is not working in high temperature environment, greatly improving the service life of mould and bearings.

(7)Molding pressing density can be adjusted:

the pressed density between 0.8-1.4 g/cm3 can be arbitrary adjustment, can be compressed straw coal, also can suppress livestock feed press block.

The technical data of straw pellet machine as following chart 

5.Cooling process of straw pellet mill line

After the pelletizing process, the temperature of the pellets is about 60-80 degree, and the moisture content of the pellets is about 15%, so we need use Cooler to reduce about 3-4% moisture, so the pellets can be easy to store.

6.Packing process of straw pellet mill line

Avoiding the pellets affected with damp. The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine or automatic packing machine to you.

The main process of straw pellet mill line as following chart:

If you are interested in the 800kg/h reliable quality straw pellet mill line,please contact me freely!