SHINA Air Separator

PROCESS 

The ITC air classifier is designed for fine classification in the range of 5-45μ.

This type of classifier belongs to the family of turbo classifier.

The classifier ITC is a so-called deflecting wheel separator.

The feed material is transported “airborne” by the primary air into the classifying chamber.

The secondary air, entering the classifier chamber via a ring of guide vanes, has to disperse agglomerates.

Mainly the classifier is integrated in a grinding-classifying circuit.

For this application a high feed rate with a good yield is assured.

The materials of construction are selected for highest strength during production.

The wheel is placed in a vertical position to get a good dispersion of the feed product.

The machines of the series ITC can be protected against wear.

FEATURES

-   Fine classification with high performance                 

-   Direct and belt drive                                  

-   Feed in the classifying zone by air                      

-   High feed rates possible                              

-   Adjustment of cut point by variable rotor speed via frequency converter

-   Construction materials mild steel, stainless steel or wear protected                                        

-   The solid construction and the selected materials of construction give a long life time with low          maintenance costs and low investment

Chemicals, minerals (such as calcium carbonate, kaolin, classification of quartz, barite, talc, graphite and other non-metallic mineral products), ceramic, refractory material, medicine, pesticide, food, new materials and other industries.

Note: 1. Capacity depends on material properties and final product fineness.

2. Product fineness is adjustable. 

Quality guarantee is for 18 months. During 18 months, if there is any problem or destroy (non-artificial damage), we will repair or change for free. After 18 months, if there is any problem, we will still supply good service, and we will charge cost if parts needed to be changed. 

- Flow sheet of the process
- Electrical interlocking sequence
- Dimension drawings for supplied equipment
- Operation manuals
- Technical information and specification for local supply
- Engineering drawings for local supplies
- Technology data and drawings for installation and commissioning
- Spare parts list