MPC6536, Dispensing Robot Controller

MPC6536 is designed for the open-loop motion control system in which the dispensing robot, dripping (micro-injection) and soldering. Based on DSP and FPGA technology, the advanced velocity look-ahead and trajectory blending algorithm ensure the velocity invariableness and transition smoothness between any two-trajectory segments during the high speed X-Y-Z continuous trajectory motion. The supplementary software, LOGOSHOP offers powerful functions, such as 3D rotate, array and dynamic reading.

Applications:

Dispensing, dripping (auto-injection) and soldering machines in the industries of audio, electronics and others, open-loop motion control system.

Features:

• Stand-alone
• Stepping/servo motor compliance
• Max. pulse output frequency 7.5MHz
• High precision control, +/-0.5 pulse
• Max machining speed, 1000mm/s (depending on mechanical structure)
• Store up to 65536 dynamic files, max 100K dots in each file
• Embedded 4-CH input and 4-CH output, 8-CH input and 24-CH output by P37-05
• 3-axis circular interpolation
• Firmware updated by USB flash drive

Supplementary Software, LOGOSHOP

l       Supports file format, NC, AI, DXF, JPG and BMP

l       Synchronized tune, what you see is what you get

l       3D dynamic reading, rotating and arraying

l       Read and transfer a over-10MB file

l       Auto-path and user-define patch

Software Environment

MPC6536 does not support connecting PC

Soldering system (DSP5.2W) does not use LOGOSHOP

LOGOSHOP is the supplementary in operation the system of DSP5.2A and DSP5.2M

LOGOSHOP-saved job file transferred by the flash drive to the teaching pendant

Working Environment

Temperature: 0-60°C

Humidity: 5-90%, non condensing

Power

24VDC, 2A

Packing List

* Some products may not have dedicated packagings.