Promotion!!2014 Hottest ELM327 Bluetooth ELM 327 V2.1 Interface OBD2 / OBD II Auto Car Diagnostic Scanner

Specifications

ELM327 Interface Bluetooth

We've improved our best OBD Interpreter, so now elm327 obd2 diagnostic tool is even better!

The ELM327 bluetooth Interface obd2 code reader is more functional now.And also ELM327 bluetooth obd2 auto scanner is easy to operate.

The new v1.4 has taken the proven v1.3, added more error monitoring and recovery, added several more AT commands, has improved the CAN printing, and has added a few features that many of you have been asking for.

To name just a few of the new features, you can now:
set the maximum number of responses to obtain
remove spaces from ECU responses (to speed data transmission)
store a unique identifier in EEPROM
set the CAN mask and filter with one command
easily switch between variable and fixed CAN message lengths
send CAN remote frames (RTRs)

Features
The program lets you perform the following operations:
♦Read diagnostic trouble codes, both generic and manufacturer-specific , and display their meaning (over 3000 generic code definitions in the database).
♦Clear trouble codes and turn off the MIL ("Check Engine" light)
♦Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others...

Multi-Protocol Support
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
SAE J1939

Vehicle Coverage
Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)

For your information
For your vehicle to be OBD2 compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD2 compliant.

Software Included
Scantool_net113win (Full Version)
EasyOBDII V2.2 (Full Version)
This hardware can match many other software still! But most are not free.
Can match Windows 98/ME/2000/XP/7,Some sfotware work for vista!

Main Control Chip:PIC18F2480
Pass Key: 1234

Packing List
A. Elm327 Main Unit
B. CD-ROM