fuly-automatic hdpe bottle extrusion blow molding machine

blow molding machine

(1) PP/PE/PVC/PC/AS/PET/PET-G;

(2) Products of volume: 30ml-1000L;

(3) 1 year warranty;

(4) All machine for Hydraulic system

(5)Screw diameter :50mm;55mm,65mm,70mm,80mm,90mm,100mm,120mm,130mm etc.

(6) L/D: 23:1; 25:1; 28:1, 30:1

(7) From 1-3 layers

We providing PP, PE, PC, PVC, PS, AVS, PET, PET-G, extrusion blow molding machine and stretch blow molding machine, blow mold, auxiliary machines industry, with more than 20 years experience to export to American, here are machines for your reference: for example-   blow molding machine

blow molding machine

One-step Injection Stretch Blow Molding Machine advantages are as follows:

    1. The wheel part is driven by electrical servo motor, hydraulic contaminating avoided;

    2. Full automatic control, easy operating;

    3. The temperature of material barrel and hot runner is controlled accurately by PIT;

    4. More cost is saved than traditional machine;

    5. Compact structure; little ground and space needed;

    6. Injection:

          Hot runner and temperature control device are standard configuration. Only mould changed for making a new product;

          Blow:

Hydraulic mold clamping, core insert, blow and bottom molding are standard configuration.

Product release: Ejector is a standard device.

We can provide the full service for mould design and manufacturing.

Four cavities for semi automatic with automatic feeder:

     1, fast than normal semi automatic blow molding machine

     2, save energy

     3, the output of per hour more than normal semi automatic machine

     4, with good quality and good service

Both of them has videos, please kindly let me know if you want to see videos of them.

   Brief Introduction

Taizhou Huangyan Yanfeng Plastic Machinery Factory, is based in Huangyan, Taizhou City, Zhejiang Province, the east of China. It is specialized in providing PP, PE, PC, PVC, PS, AVS, PET, PET-G, extrusion blow molding machine and stretch blow molding machine, blow mold, auxiliary machines industry, with more than 20 years experience to export to American, European, Oceanica, Middle East, Asian and African Markets. For example-?

Its main products includes:

-extrusion blow molding machine (from 30ml-1000L )

-stretch blow molding machine (from 50ml-25L)

-blow mold (from 30ml-1000L )

-auxiliary machines

Comparing to other companies, its advantage mainly exists in the following 6 aspects:

1, Very wide range products

2, 20 years experience

3, A large number of patent certificates

4, Customized ability

5, More than 1000pcs different samples

6, Sales to more than 60 countries

For more details, please kindly check the company profile page.

Company 

Workshop & Equipment

Sample Room 

Exhibition

1, Trainning for free

The Buyer could dispatch their operators to the Seller’s factory for training, including machine operation, maintenance & simple repairs Or against the requests of the Buyer, the Seller’s technician could train the Buyer’s operators in the Buyer’s factory in the periods of installing & adjusting;

2,Installation & Adjustment

The Seller could dispatch an engineer against the requests of the Buyer to install and adjust the machines for one week in the Buyer’s factory.

The Buyer should make a reservation in advance before delivery of the machines;

The Buyer should pay for the engineer’s visa application cost, round air tickets, food & board before his departure;

3, Guarantee

The guarantee time is one year after the machines normally works in the Buyer’s factory, if only the problem is cause due to quality control or any reason by the Seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems. Any problem caused due to irregular operation or incorrect maintenance by the Buyer won’t be listed in guarantee coverage.

4, 100% Quality inspection before the shipment;

5, Reply the email and take action in 24 hours;

1. Standard film packing

2. Wooden case packing is available

3. One machine and some auxiliary equipment are in one container 4.check by clients before packing and shipment

5. Clients' special packing request is available

   blow molding machine

[1] Q:Are you a trading company or a manufactory? For example- blow molding machine
machine

A: We own a factory ourselves, and we can assure the quality we manufactured.

[2] Q: Where is your factory located?

A: Our factory,near Shanghai & Ningbo port, is located in Huangyan,Taizhou,Zhejiang and 3 hours by train from Shanghai, 2 hours by air from Guangzhou.

[3] Q: How about quality control in your factory?

A: “ Quality is the key point, do what customers need”

YANFENG  machinery factory focuses on quality,quality control from beginning to the end. Every piece of goods is tested strictly before packing and delivery.

[4] Q: How about guarantee ?

A: One year guarantee.

[5] Q: Do you provide bottle blow mould and air compresor ?

A: Yes , we provide complete system and you will no need to find the suitable air compressor and chiller...etc..

[6] Q: What is the language of the PLC and touch panel?

A: Don’t worry, we will translate the language in English,Spanish or any other language, to make sure you will have an easy operation .

[7] Q: Can you help us with the shipment of this machine ?

A: Yes,we have got our special shipment and forwarder company with long time cooperation.

[8] Q:What is the trade terms?

A: We accept a lot of trade terms as EXW, FCA, FOB, CFR, CIF, DDU, DDP etc.. Different trade terms will lead to different price. Please inform us the trade terms you prefer and your nearest destination port name if you have any special requirements. If the customer doesn't mention it, our defaulted trade terms is FCA or FOB Shanghai/Ningbo.

[9] Q:How many days will be finished after we pay the deposit?

A: Around 30-50 work days.

[10] Q:What packaging of machines after inspection before delivery?

A: 1. standard film packing

2. wooden case packing is available

3.one machine and some auxiliary equipment are in one container

4.check by clients before packing and shipment

5.clients' special packing request is available