Car Brake making machine

 car Brake Pads making machine

RYS-B series

Structural characteristic

1.     Adapts balance cylinder floating equal pressure technology,  it can effectively reduce the weight tolerance(±10g) of the material in casting process and improve the brake pads quality, lower the brake noise and vibration.

2.     Upper mould is easy to replace and the mould replacing time is within 5mins.

3.     Multi-station machines can be arranged in Line or in circular.

Control characteristic:

1.     Adapts Simens PLC control system and with Industrial Ethernet interface

2.     12” industrial panel computer shows the real-time running state of multi station machines

3.     6’ touch screen shows the real-time running state of the single station machine

4.     Mould heating system is separately controlled by single station. It adapts PID  temperature  control  ensure the temperature tolerance inside the mould cavity is within plus and minus 3 degree centigrade.

5.     Pressing pressure gets feed back from the high precision pressure sensor, it is real time control. And the main cylinder pressure can be accurately controlled within Plus and minus 0.3Mpa

Machine characteristic:

1.     Lower mould cost with modular design and compact structure  

2.     Can be widely used and meet the small and medium production capacity requirement

3.     Small size and excellent appearance.

Product specification